Seagate ST317240A, ST38420A, ST313030A, ST310231A, ST34310A manual Configuring your computer

Page 13

Medalist 17240, 13030, 10231, 8420 and 4310, Rev. B

9

Configuring your computer

Before you format or partition your new drive, you must configure your computer’s BIOS so that the computer can recognize your new drive.

1.Turn your computer on. As your computer starts up, watch the screen for a message that describes how to run the system setup program (also called BIOS or CMOS setup). This is usually done by pressing a special key, such as DELETE, ESC OR F1, during startup. See your computer manual for details. Press the appropriate key to run the System Setup program.

2.Enable LBA mode if it is available. Many BIOS use the logical block addressing (LBA) mode to access drives with capacities greater than 528 Mbytes.

3.If your BIOS provides automatic drive detection (an “Auto” drive type), select this option. This allows your computer to configure itself automatically for your new drive.

If your BIOS does not provide automatic drive detection, select “User-defined” drive settings and enter the CHS values from the table on page 10. These CHS values support capac- ities up to 8.4 Gbytes.

4.Save the settings and exit the System Setup program. Your computer will automatically reboot.

Page 12 Page 14
Image 13
Page 12 Page 14
Contents Installation Guide Page Contents Medalist 17240, 13030, 10231, 8420 and 4310, Rev. B Easiest way to install your drive Before you begin What you needHandling precautions To configure the drive as a slave To configure the drive as a master or one drive onlyMaster/slave jumpers Master and slave jumper settings Attaching the cables Attaching cables and mounting the driveMounting screws Cable connectors Configuring your computer Bios Settings Drive Cylinders Heads Sectors Addressing drive-capacity limitations RecommendationMbyte limit Gbyte limit Cylinder limitBios upgrades One drive Partitioning and formatting your driveTwo drives Installation using Disk Manager Windows 95 or Windows 98 installation Drive partitioning Standard DOS installationDrive formatting Non-ATA-compatible slave jumper Additional installation optionsCable select jumper Advanced Disk Manager options Booting from a disketteDisk Manger online manual Removing the dynamic drive overlay Supported operating systemsFollow these instructions to remove a DDO from a drive Select Uninstall Disk ManagerTroubleshooting Additional troubleshooting tips Full capacity Limit capacity to 2.1 Gbytes 4,092 cylinders System does not recognize the drive Screen remains blank when you power up the systemPage Medalist 17240, 13030, 10231, 8420 and 4310, Rev. B Fdisk error message, No Fixed Disk Present, appears System error message, Drive not Ready, appearsDrive does not format to full capacity Drive again. This erases data on the drive System error message, HDD controller failure appearsOnline services Seagate Technology support servicesAutomated services Technical support Presales SupportWarranty repair Customer Service CSOSeaFAX 1-800-SEAGATE Call Center European support servicesAfrica/Middle East support services Asia/Pacific support services Seagate drive and approved packing materials Storing and shipping your driveMaintenance and repair WarrantyElectromagnetic Compliance for the European Union SicherheitsanleitungPage Page

ST34310A, ST38420A, ST317240A, ST310231A, ST313030A specifications

The Seagate ST313030A, ST310231A, ST317240A, ST38420A, and ST34310A are notable hard drive models that contributed to the evolution of data storage technology in their respective eras. Each of these drives introduced various features and innovations that catered to the growing demands for efficiency, speed, and reliability in data management.

The ST313030A is a 13GB Ultra ATA/66 hard drive that emerged in the late 1990s. It utilized a 3.5-inch form factor and was designed primarily for desktop computers. A key feature of this model was its high data transfer rate, which significantly improved the performance of applications demanding fast read/write capabilities. The drive also featured Advanced Power Management (APM) technology, allowing it to balance performance with energy efficiency.

Following closely was the ST310231A, a 10GB hard drive that offered similar performance benchmarks but introduced enhancements in error correction and data integrity. The device operated at 5400 RPM, providing quicker access times compared to its predecessors. Its robust design and Native Command Queuing (NCQ) support allowed for optimized data access patterns, ultimately enhancing overall system responsiveness.

The ST317240A, another significant model, pushed boundaries with a capacity of 17GB. This drive was praised for its reliability, featuring Seagate's innovative ShockGuard technology, which provided improved resistance to physical shocks and impacts. It was designed for both consumer and enterprise applications, solidifying its place as a reliable storage solution for various use cases.

The ST38420A took a leap forward with a storage capacity of 28.6GB, integrating advanced technologies that included error recovery and a more efficient interface design. This drive also facilitated the use of larger files, catering to the growing multimedia applications of the late 1990s. Its ability to function efficiently in systems with limited power supplies made it a favorable choice for both desktop and mobile devices.

Finally, the ST34310A, boasting a capacity of 40GB, further emphasized performance and reliability. It was equipped with features like thermal recalibration, which minimized operating temperature fluctuations, prolonging the drive’s lifecycle. The drive's legacy is marked by its user-friendly interface and high compatibility across various operating systems.

In summary, these Seagate hard drives represent a pivotal evolution in storage technology, each contributing unique features and technologies that have influenced modern data storage solutions. They laid the foundation for subsequent innovations in the field, emphasizing reliability, efficiency, and performance.
Top Page Image Contents