Seagate ST310231A, ST38420A, ST313030A, ST317240A, ST34310A manual

Page 32

28 Medalist 17240, 13030, 10231, 8420 and 4310, Rev. B

•Reboot the computer and listen to make sure the drive motor starts up. If the drive is very quiet, it may be difficult to hear its discs reach operating speed. If the drive motor does not start up, recheck all drive cables.

•Verify that for each drive, a drive-type is listed in the system setup program.

•Try rebooting your computer by pressing the CTRL, ALT and DELETE keys simultaneously. If the drive is recognized after you reboot the system, the computer BIOS test may be completing before the drive is ready.

One solution is to slow the processor speed during startup. If your computer has a turbo switch, set it to slow speed before turning the computer on. If there is no turbo switch, you may be able to use keyboard commands; see your computer man- ual for details. After the computer is up and running, return the processor to the fast speed.

Another solution is to warm-boot your computer after every power-on.

•Check for I/O address conflicts. To isolate the conflict, verify that the drive and host adapter are compatible with your com- puter. Turn off the computer and remove all the peripheral adapter cards except for the video card and host adapter. If the computer recognizes the drive when you reboot the com- puter, turn off the computer. Reinstall the other peripheral cards, one at a time, until the conflict reoccurs. After you have isolated the source of the address conflict, you can resolve the conflict by changing the I/O address of the peripheral that appears to cause the conflict.

Page 31 Page 33
Image 32
Page 31 Page 33
Contents Installation Guide Page Contents Medalist 17240, 13030, 10231, 8420 and 4310, Rev. B Easiest way to install your drive What you need Before you beginHandling precautions Master/slave jumpers To configure the drive as a master or one drive onlyTo configure the drive as a slave Master and slave jumper settings Attaching cables and mounting the drive Attaching the cablesMounting screws Cable connectors Configuring your computer Bios Settings Drive Cylinders Heads Sectors Mbyte limit RecommendationAddressing drive-capacity limitations Cylinder limit Gbyte limitBios upgrades Two drives Partitioning and formatting your driveOne drive Installation using Disk Manager Windows 95 or Windows 98 installation Standard DOS installation Drive partitioningDrive formatting Additional installation options Non-ATA-compatible slave jumperCable select jumper Disk Manger online manual Booting from a disketteAdvanced Disk Manager options Supported operating systems Removing the dynamic drive overlaySelect Uninstall Disk Manager Follow these instructions to remove a DDO from a driveTroubleshooting Additional troubleshooting tips Full capacity Limit capacity to 2.1 Gbytes 4,092 cylinders Screen remains blank when you power up the system System does not recognize the drivePage Medalist 17240, 13030, 10231, 8420 and 4310, Rev. B Drive does not format to full capacity System error message, Drive not Ready, appearsFdisk error message, No Fixed Disk Present, appears System error message, HDD controller failure appears Drive again. This erases data on the driveAutomated services Seagate Technology support servicesOnline services Presales Support Technical supportCustomer Service CSO Warranty repairSeaFAX 1-800-SEAGATE European support services Call CenterAfrica/Middle East support services Asia/Pacific support services Storing and shipping your drive Seagate drive and approved packing materialsWarranty Maintenance and repairElectromagnetic Compliance for the European Union SicherheitsanleitungPage Page

ST34310A, ST38420A, ST317240A, ST310231A, ST313030A specifications

The Seagate ST313030A, ST310231A, ST317240A, ST38420A, and ST34310A are notable hard drive models that contributed to the evolution of data storage technology in their respective eras. Each of these drives introduced various features and innovations that catered to the growing demands for efficiency, speed, and reliability in data management.

The ST313030A is a 13GB Ultra ATA/66 hard drive that emerged in the late 1990s. It utilized a 3.5-inch form factor and was designed primarily for desktop computers. A key feature of this model was its high data transfer rate, which significantly improved the performance of applications demanding fast read/write capabilities. The drive also featured Advanced Power Management (APM) technology, allowing it to balance performance with energy efficiency.

Following closely was the ST310231A, a 10GB hard drive that offered similar performance benchmarks but introduced enhancements in error correction and data integrity. The device operated at 5400 RPM, providing quicker access times compared to its predecessors. Its robust design and Native Command Queuing (NCQ) support allowed for optimized data access patterns, ultimately enhancing overall system responsiveness.

The ST317240A, another significant model, pushed boundaries with a capacity of 17GB. This drive was praised for its reliability, featuring Seagate's innovative ShockGuard technology, which provided improved resistance to physical shocks and impacts. It was designed for both consumer and enterprise applications, solidifying its place as a reliable storage solution for various use cases.

The ST38420A took a leap forward with a storage capacity of 28.6GB, integrating advanced technologies that included error recovery and a more efficient interface design. This drive also facilitated the use of larger files, catering to the growing multimedia applications of the late 1990s. Its ability to function efficiently in systems with limited power supplies made it a favorable choice for both desktop and mobile devices.

Finally, the ST34310A, boasting a capacity of 40GB, further emphasized performance and reliability. It was equipped with features like thermal recalibration, which minimized operating temperature fluctuations, prolonging the drive’s lifecycle. The drive's legacy is marked by its user-friendly interface and high compatibility across various operating systems.

In summary, these Seagate hard drives represent a pivotal evolution in storage technology, each contributing unique features and technologies that have influenced modern data storage solutions. They laid the foundation for subsequent innovations in the field, emphasizing reliability, efficiency, and performance.
Top Page Image Contents