Seagate ST38420A, ST313030A, ST310231A, ST317240A manual Drive again. This erases data on the drive

Page 35

Medalist 17240, 13030, 10231, 8420 and 4310, Rev. B

31

Caution. If you change the drive-type values in the ! system setup program, you must partition and format

the drive again. This erases data on the drive.

• If you have partitioned the drive into individual logical drives, you may need to make the partitions smaller to access the full drive capacity.

• If your computer supports LBA mode, you may need to enable LBA mode in the system setup program to access the full capacity of the drive. Refer to your computer’s reference guide to find out how to enable LBA.

• Your computer may not support drives that have more than 4,092 cylinders. Follow the instructions on page 25 for After you install your new drive, your computer will not boot, and no error message appears on the screen.

The DOS message “Disk Boot Failure,” “Non-System Disk” or “No ROM Basic – SYSTEM HALTED” appears.

•Reinstall the DOS system files using the DOS SYS utility.

•Check all cables.

•Use FDISK to verify that the primary partition is active.

•Check for viruses.

The system error message, “HDD controller failure” appears.

•Confirm the jumper settings on the drive.

•Verify the drive-type settings in the system setup program.

Page 34 Page 36
Image 35
Page 34 Page 36
Contents Installation Guide Page Contents Medalist 17240, 13030, 10231, 8420 and 4310, Rev. B Easiest way to install your drive Before you begin What you needHandling precautions Master/slave jumpers To configure the drive as a master or one drive onlyTo configure the drive as a slave Master and slave jumper settings Attaching the cables Attaching cables and mounting the driveMounting screws Cable connectors Configuring your computer Bios Settings Drive Cylinders Heads Sectors Mbyte limit RecommendationAddressing drive-capacity limitations Gbyte limit Cylinder limitBios upgrades Two drives Partitioning and formatting your driveOne drive Installation using Disk Manager Windows 95 or Windows 98 installation Drive partitioning Standard DOS installationDrive formatting Non-ATA-compatible slave jumper Additional installation optionsCable select jumper Disk Manger online manual Booting from a disketteAdvanced Disk Manager options Removing the dynamic drive overlay Supported operating systemsFollow these instructions to remove a DDO from a drive Select Uninstall Disk ManagerTroubleshooting Additional troubleshooting tips Full capacity Limit capacity to 2.1 Gbytes 4,092 cylinders System does not recognize the drive Screen remains blank when you power up the systemPage Medalist 17240, 13030, 10231, 8420 and 4310, Rev. B Drive does not format to full capacity System error message, Drive not Ready, appearsFdisk error message, No Fixed Disk Present, appears Drive again. This erases data on the drive System error message, HDD controller failure appearsAutomated services Seagate Technology support servicesOnline services Technical support Presales SupportWarranty repair Customer Service CSOSeaFAX 1-800-SEAGATE Call Center European support servicesAfrica/Middle East support services Asia/Pacific support services Seagate drive and approved packing materials Storing and shipping your driveSicherheitsanleitung WarrantyMaintenance and repair Electromagnetic Compliance for the European UnionPage Page

ST34310A, ST38420A, ST317240A, ST310231A, ST313030A specifications

The Seagate ST313030A, ST310231A, ST317240A, ST38420A, and ST34310A are notable hard drive models that contributed to the evolution of data storage technology in their respective eras. Each of these drives introduced various features and innovations that catered to the growing demands for efficiency, speed, and reliability in data management.

The ST313030A is a 13GB Ultra ATA/66 hard drive that emerged in the late 1990s. It utilized a 3.5-inch form factor and was designed primarily for desktop computers. A key feature of this model was its high data transfer rate, which significantly improved the performance of applications demanding fast read/write capabilities. The drive also featured Advanced Power Management (APM) technology, allowing it to balance performance with energy efficiency.

Following closely was the ST310231A, a 10GB hard drive that offered similar performance benchmarks but introduced enhancements in error correction and data integrity. The device operated at 5400 RPM, providing quicker access times compared to its predecessors. Its robust design and Native Command Queuing (NCQ) support allowed for optimized data access patterns, ultimately enhancing overall system responsiveness.

The ST317240A, another significant model, pushed boundaries with a capacity of 17GB. This drive was praised for its reliability, featuring Seagate's innovative ShockGuard technology, which provided improved resistance to physical shocks and impacts. It was designed for both consumer and enterprise applications, solidifying its place as a reliable storage solution for various use cases.

The ST38420A took a leap forward with a storage capacity of 28.6GB, integrating advanced technologies that included error recovery and a more efficient interface design. This drive also facilitated the use of larger files, catering to the growing multimedia applications of the late 1990s. Its ability to function efficiently in systems with limited power supplies made it a favorable choice for both desktop and mobile devices.

Finally, the ST34310A, boasting a capacity of 40GB, further emphasized performance and reliability. It was equipped with features like thermal recalibration, which minimized operating temperature fluctuations, prolonging the drive’s lifecycle. The drive's legacy is marked by its user-friendly interface and high compatibility across various operating systems.

In summary, these Seagate hard drives represent a pivotal evolution in storage technology, each contributing unique features and technologies that have influenced modern data storage solutions. They laid the foundation for subsequent innovations in the field, emphasizing reliability, efficiency, and performance.
Top Page Image Contents