Contents
Installation Guide
Page
Contents
Medalist 17240, 13030, 10231, 8420 and 4310, Rev. B
Easiest way to install your drive
Before you begin
What you need
Handling precautions
To configure the drive as a master or one drive only
To configure the drive as a slave
Master/slave jumpers
Master and slave jumper settings
Attaching the cables
Attaching cables and mounting the drive
Mounting screws
Cable connectors
Configuring your computer
Bios Settings Drive Cylinders Heads Sectors
Recommendation
Addressing drive-capacity limitations
Mbyte limit
Gbyte limit
Cylinder limit
Bios upgrades
Partitioning and formatting your drive
One drive
Two drives
Installation using Disk Manager
Windows 95 or Windows 98 installation
Drive partitioning
Standard DOS installation
Drive formatting
Non-ATA-compatible slave jumper
Additional installation options
Cable select jumper
Booting from a diskette
Advanced Disk Manager options
Disk Manger online manual
Removing the dynamic drive overlay
Supported operating systems
Follow these instructions to remove a DDO from a drive
Select Uninstall Disk Manager
Troubleshooting
Additional troubleshooting tips
Full capacity Limit capacity to 2.1 Gbytes 4,092 cylinders
System does not recognize the drive
Screen remains blank when you power up the system
Page
Medalist 17240, 13030, 10231, 8420 and 4310, Rev. B
System error message, Drive not Ready, appears
Fdisk error message, No Fixed Disk Present, appears
Drive does not format to full capacity
Drive again. This erases data on the drive
System error message, HDD controller failure appears
Seagate Technology support services
Online services
Automated services
Technical support
Presales Support
Warranty repair
Customer Service CSO
SeaFAX 1-800-SEAGATE
Call Center
European support services
Africa/Middle East support services
Asia/Pacific support services
Seagate drive and approved packing materials
Storing and shipping your drive
Sicherheitsanleitung
Warranty
Maintenance and repair
Electromagnetic Compliance for the European Union
Page
Page