Seagate ST313030A, ST38420A, ST310231A, ST317240A Screen remains blank when you power up the system

Page 31

Medalist 17240, 13030, 10231, 8420 and 4310, Rev. B

27

3.Remount your drive in the computer and replace the computer cover.

4.Insert a bootable system diskette into drive A and turn on the computer. It should boot from drive A and automatically detect the new drive as a 2.1-Gbyte drive.

5.Insert your DiscWizard diskette into drive A and type A:\DM. Then press ENTER. This runs the Disk Manager program.

6.Follow the Disk Manager instructions to install the dynamic drive overlay and to partition and format your new drive to its full capacity.

7.After Disk Manager is done, reboot your system. You should see the Disk Manager banner and be able to access the full capacity of your new drive.

The screen remains blank when you power up the system.

If the steps listed above do not remedy this problem, try the fol- lowing:

•Make sure the monitor is plugged in and turned on.

•Check all cards.

•Make sure the video card is seated in its slot and secured with mounting screws.

•Turn off the computer and remove the drive host adapter. If the screen turns on after you reboot, the host adapter may be incompatible or defective. If so, see your dealer.

The system does not recognize the drive.

•Check all cables.

•Make sure the power supply is adequate for system needs.

Page 30 Page 32
Image 31
Page 30 Page 32
Contents Installation Guide Page Contents Medalist 17240, 13030, 10231, 8420 and 4310, Rev. B Easiest way to install your drive Before you begin What you needHandling precautions To configure the drive as a slave To configure the drive as a master or one drive onlyMaster/slave jumpers Master and slave jumper settings Attaching the cables Attaching cables and mounting the driveMounting screws Cable connectors Configuring your computer Bios Settings Drive Cylinders Heads Sectors Addressing drive-capacity limitations RecommendationMbyte limit Gbyte limit Cylinder limitBios upgrades One drive Partitioning and formatting your driveTwo drives Installation using Disk Manager Windows 95 or Windows 98 installation Drive partitioning Standard DOS installationDrive formatting Non-ATA-compatible slave jumper Additional installation optionsCable select jumper Advanced Disk Manager options Booting from a disketteDisk Manger online manual Removing the dynamic drive overlay Supported operating systemsFollow these instructions to remove a DDO from a drive Select Uninstall Disk ManagerTroubleshooting Additional troubleshooting tips Full capacity Limit capacity to 2.1 Gbytes 4,092 cylinders System does not recognize the drive Screen remains blank when you power up the systemPage Medalist 17240, 13030, 10231, 8420 and 4310, Rev. B Fdisk error message, No Fixed Disk Present, appears System error message, Drive not Ready, appearsDrive does not format to full capacity Drive again. This erases data on the drive System error message, HDD controller failure appearsOnline services Seagate Technology support servicesAutomated services Technical support Presales SupportWarranty repair Customer Service CSOSeaFAX 1-800-SEAGATE Call Center European support servicesAfrica/Middle East support services Asia/Pacific support services Seagate drive and approved packing materials Storing and shipping your driveSicherheitsanleitung WarrantyMaintenance and repair Electromagnetic Compliance for the European UnionPage Page

ST34310A, ST38420A, ST317240A, ST310231A, ST313030A specifications

The Seagate ST313030A, ST310231A, ST317240A, ST38420A, and ST34310A are notable hard drive models that contributed to the evolution of data storage technology in their respective eras. Each of these drives introduced various features and innovations that catered to the growing demands for efficiency, speed, and reliability in data management.

The ST313030A is a 13GB Ultra ATA/66 hard drive that emerged in the late 1990s. It utilized a 3.5-inch form factor and was designed primarily for desktop computers. A key feature of this model was its high data transfer rate, which significantly improved the performance of applications demanding fast read/write capabilities. The drive also featured Advanced Power Management (APM) technology, allowing it to balance performance with energy efficiency.

Following closely was the ST310231A, a 10GB hard drive that offered similar performance benchmarks but introduced enhancements in error correction and data integrity. The device operated at 5400 RPM, providing quicker access times compared to its predecessors. Its robust design and Native Command Queuing (NCQ) support allowed for optimized data access patterns, ultimately enhancing overall system responsiveness.

The ST317240A, another significant model, pushed boundaries with a capacity of 17GB. This drive was praised for its reliability, featuring Seagate's innovative ShockGuard technology, which provided improved resistance to physical shocks and impacts. It was designed for both consumer and enterprise applications, solidifying its place as a reliable storage solution for various use cases.

The ST38420A took a leap forward with a storage capacity of 28.6GB, integrating advanced technologies that included error recovery and a more efficient interface design. This drive also facilitated the use of larger files, catering to the growing multimedia applications of the late 1990s. Its ability to function efficiently in systems with limited power supplies made it a favorable choice for both desktop and mobile devices.

Finally, the ST34310A, boasting a capacity of 40GB, further emphasized performance and reliability. It was equipped with features like thermal recalibration, which minimized operating temperature fluctuations, prolonging the drive’s lifecycle. The drive's legacy is marked by its user-friendly interface and high compatibility across various operating systems.

In summary, these Seagate hard drives represent a pivotal evolution in storage technology, each contributing unique features and technologies that have influenced modern data storage solutions. They laid the foundation for subsequent innovations in the field, emphasizing reliability, efficiency, and performance.
Top Page Image Contents