Seagate ST34310A, ST38420A, ST313030A manual Warranty, Maintenance and repair, Sicherheitsanleitung

Page 44

40 Medalist 17240, 13030, 10231, 8420 and 4310, Rev. B

Warranty

See your authorized Seagate distributor or dealer. Preinstalled or bundled software is provided “as is.” There are no warranties of merchantability or fitness for a particular purpose. All such warranties are expressly and specifically disclaimed.

Maintenance and repair

Seagate drives do not require maintenance. The head/disc assembly is sealed; a broken seal voids the warranty. Seagate customer-service centers are the only facilities authorized to repair Seagate drives.

Electromagnetic Compliance for the European Union

This model complies with the European Union requirements of the Electromagnetic Compatibility Directive 89/336/EEC of 03 May 1989 as amended by Directive 92/31/EEC of 28 April 1992 and Directive 93/68/EEC of 22 July 1993.

Compliance of this drive, as a system component, was con- firmed with a test system. We cannot guarantee that your system will comply. The drive is not meant for external use (without prop- erly designed enclosure, shielded I/O cable, etc.).

Sicherheitsanleitung

1.Das Gerrät ist ein Einbaugerät, das für eine maximale Umge- bungstemperatur von 55°C vorgesehen ist. 2. Zur Befestigung des Laufwerks werden 4 Schrauben 6-32 UNC-2A benötigt. Bei seitlicher Befestigung darf die maximale Länge der Schrauben im Chassis nicht mehr als 3,3 mm und bei Befestigung an der Unterseite nicht mehr als 5,08 mm betragen. 3. Als Versor- gungsspannugen werden benötigt: +5V ± 5% 0,6A; +12V ±% 0,8A (1,9A fur ca. 30 Sek. fur ± 10%) 4. Die Versorgungsspan-

Image 44
Contents Installation Guide Page Contents Medalist 17240, 13030, 10231, 8420 and 4310, Rev. B Easiest way to install your drive What you need Before you beginHandling precautions Master/slave jumpers To configure the drive as a master or one drive onlyTo configure the drive as a slave Master and slave jumper settings Attaching cables and mounting the drive Attaching the cablesMounting screws Cable connectors Configuring your computer Bios Settings Drive Cylinders Heads Sectors Mbyte limit RecommendationAddressing drive-capacity limitations Cylinder limit Gbyte limitBios upgrades Two drives Partitioning and formatting your driveOne drive Installation using Disk Manager Windows 95 or Windows 98 installation Standard DOS installation Drive partitioningDrive formatting Additional installation options Non-ATA-compatible slave jumperCable select jumper Disk Manger online manual Booting from a disketteAdvanced Disk Manager options Supported operating systems Removing the dynamic drive overlaySelect Uninstall Disk Manager Follow these instructions to remove a DDO from a driveTroubleshooting Additional troubleshooting tips Full capacity Limit capacity to 2.1 Gbytes 4,092 cylinders Screen remains blank when you power up the system System does not recognize the drivePage Medalist 17240, 13030, 10231, 8420 and 4310, Rev. B Drive does not format to full capacity System error message, Drive not Ready, appearsFdisk error message, No Fixed Disk Present, appears System error message, HDD controller failure appears Drive again. This erases data on the driveAutomated services Seagate Technology support servicesOnline services Presales Support Technical supportCustomer Service CSO Warranty repairSeaFAX 1-800-SEAGATE European support services Call Center Africa/Middle East support services Asia/Pacific support services Storing and shipping your drive Seagate drive and approved packing materialsWarranty Maintenance and repairElectromagnetic Compliance for the European Union SicherheitsanleitungPage Page