i n t e l l i g e n t | w i r e l e s s | p l a t f o r m |
2.9Remote Router/NAT Configuration
The airHaul2 Nexus PRO units can also be configured to operate as a Remote device to associate with Root Bridge. In Remote Mode the unit can operate as Bridge or Router.
2.9.1 Bridge IP Configuration
The Ethernet IP is configured when the operational mode of one of the radios is configured as Remote Router/NAT.
Follow these steps below if you need to
1.From the ’Summary Information’ page, click on the ’Bridge IP Configuration’ link to change Ethernet parameters.
2.Enter the ‘IP address’ and ‘IP mask’.
3.Click on the ‘Apply Changes’ button to change the settings.
Figure 2-40 Remote Router/NAT Ethernet Configurations
airHaul2 Nexus PRO™ User Guide | Page 55 of 113 |
|