i n t e l l i g e n t | w i r e l e s s | p l a t f o r m |
In order for the Remote Router/NAT device to associate with the Root Bridge device, the user needs to configure the Root Bridge’s SSID and channel information for the Remote Router/NAT device.
Follow these steps below to configure the Remote Router/NAT Mode wireless association parameters:
1.From the ‘Radio’ dropdown menu, choose the radio that has to be configured with the wireless settings.
2.Enter the SSID and domain of the airHaul2 Nexus PRO Root Bridge device.
3.Select the Transmit Power of the radio from
4.Select the gain of the antenna from the dropdown menu according to the gain of the antenna being used with the equipment
5.Enter the RF cable loss based on the cable specifications
6.Click ‘Apply Changes’. The units will attempt to associate.
Note: Clicking on ‘Status’ will display further details on the association.
Figure 2-42 Remote Router/NAT Wireless Association Settings
Figure 2-43 Remote Router/NAT Associated
airHaul2 Nexus PRO™ User Guide | Page 57 of 113 |
|