i n t e l l i g e n t | w i r e l e s s | p l a t f o r m |
2.9.2 Wireless Configuration
The wireless parameters need to be configured to allow the Remote Router/NAT airHaul2 Nexus PRO unit to associate with the Root Bridge unit.
Follow these steps below to configure the Remote Router/NAT Mode Wireless IP Settings parameters:
1.Click on the ‘Wireless IP Configuration’ link from the ‘Summary Information’ page.
2.Enter the wireless ‘IP address’, ‘IP Mask’ and ‘Gateway IP’ address for the airHaul2 Nexus PRO unit.
3.Check the ‘Enable DHCP’ checkbox to obtain an IP address automatically from network.
4.Click on the ‘Apply Changes’ to change the settings.
Figure 2-41 Remote Router/NAT Wireless IP Configuration
airHaul2 Nexus PRO™ User Guide | Page 56 of 113 |
|