SmartBridges sB3021 manual Radio Operating, Mode, Throughput, Optimizer, Enter the Fragment Length

	i n t e l l i g e n t	w i r e l e s s	p l a t f o r m
Page Item	Descriptions
	According to the IEEE 802.11 standard specification, a single frame
	combining a plurality of information can be transmitted. For example,
	the frame may carry data+acknowledgement (ACK), data+poll , data+
	ACK +poll or ACK +poll for transmission.
	Using the piggy back increases the communication efficiency,
	depending on the transfer medium or size of data being transferred.
	Note: It can be used for improved performance with compatible
	devices. (May not be compatible with third party devices).
Radio Operating	sB Enhanced Mode gives better performance with the compression
	option. For this reason, it does not support 802.11b.
mode
	The Throughput Optimizer is used to optimize the radio link speed
	and performance.
	The valid range is 0 to 10. The default value is 6.
Throughput	Setting a higher value will cause the radio to attempt to establish at
	the highest possible data rate	in an aggressive way. A smaller
Optimizer
	"Throughput Optimizer" value means a more stable link.
	Note: The default value for the Throughput Optimizer is 6. Vary the
	Throughput Optimizer settings to achieve a more stable link.

Follow the steps below to change the Radio Performance:

1.From the Radio Configuration page click on the Performance link.

2.Enter the Fragment Length.

3.Input the desired RTS/CTS Length.

4.Choose the Preamble Settings from the dropdown list.

5.Enter the Distance of the Remote Device.

6.Turn ON/OFF Frame Bursting.

7.Turn ON/OFF Concatenation.

8.Turn ON/OFF Piggy Back.

9.Choose the desired Radio Operating Mode

10.Select an appropriate value for the Throughput Optimizer.

11.Click on the Apply Changes button to effect the changes.

airHaul2 Nexus PRO™ User Guide Page 74 of 113