![](/images/new-backgrounds/1331093/33109385x1.webp)
i n t e l l i g e n t | w i r e l e s s | p l a t f o r m |
2.7Root Bridge Configuration
The airHaul2 Nexus PRO unit is configured in Root Bridge mode for use as a Root device. This section provides information on configuring in this mode.
2.7.1 Bridge IP Configurations
The Ethernet
Follow the steps below to change the Root Bridge Ethernet Configurations:
1.From the Summary Information page, click on the Bridge IP Configuration link.
2.Enter a new IP Address, IP Mask, Gateway and DHCP status (check if it is enabled, otherwise uncheck to disable it). If DHCP is checked, the IP address will be assigned by the DHCP server in the network. If there is no DHCP server, the device will revert to the previous IP address after 60 seconds.
3.Click on the Apply Changes button to change the settings.
Figure 2-30 Root Bridge Ethernet Configurations
airHaul2 Nexus PRO™ User Guide | Page 43 of 113 |
|