Uniden EXA 8955 Mounting the base unit on a wall, Standard wall plate mounting, Is firmly seated

Page 11

Mounting the base unit on a wall

Standard wall plate mounting

This phone can be mounted on any standard telephone wall plate.

1	1 Snap the wall mount
	adapter into the

notches on the base.

2	Plug the telephone
	line cord to the
	TEL LINE jack and the
	AC adapter to the
	DC IN 9V jack.
3	Plug the telephone
	line cord into the
2 - 7	telephone outlet.
2 - 7
4	Wrap the AC adapter
	cord inside the
	molded wiring
	channel. Then wrap
	the cord around the
	strain relief notch.
5	Plug the AC adapter
Wall plate	into a standard
	into a standard
	120VAC wall outlet.
6	Raise the antenna to a
	vertical position.
7	Align the mounting
	slots on the base. with
	the mounting posts on
AC adapter	the wall. Push in and
	down until the phone

AC outlet	is firmly seated.

8

Image 11

Contents Page Introduction FeaturesControls and functions 50 51 52 Contents Handset Read this firstBase unit Checking the package contents Choose the best location Setting up the baseConnect the base unit If you want to install the base unit on the wall, seeIf you arent sure of your dialing system Choose the dialing modeIf your dialing system is Set the switch to Tone PulseIs firmly seated Mounting the base unit on a wallStandard wall plate mounting Direct wall plate mounting Status LED Preparing the battery packDo not use any liquids or solvents Battery use time per chargeWhen the battery charge becomes low Cleaning the battery contactsOther Operations Making a callFrom the handset From the baseHandset off the base Receiving a callHandset on the base Handset ringer tone Adjusting the ringer and ear speaker volumeLast phone number entered can be quickly redialed Redialing a callMute When speaking on the handsetWhen speaking on the base When the phone is ringingFrom the handeset Storing phone numbersMaking calls with memory dialing From the handset Erasing a stored phone number Way conferencing Intercom from the handset to base To transfer from the base to the handset Transferring a callTo transfer from the handset to the base Integrated answering device IntegratedSetting the clock » Choosing between two outgoing messages Setting your greeting» Preset Message » Recording your personal outgoing message GreetingSelecting a PIN code » Announce only featureSelecting the message record time Setting ring time switch Playing your message Using your answering systemSkipping a message Repeating a message» Deleting all messages Deleting a messageVoice memo » Deleting individual messageRecording a conversation Command Function Remote access away from homeRemote room monitor Changing the digital security code Additional InformationTo attach the beltclip To remove the beltclip Installing the beltclipHeadset installation Battery replacement and handling MaintenanceSymptom Suggestion TroubleshootingSymptom Suggestion Handset SpecificationsGeneral Base unitW, X, Y, Z IndexK, L Page