Uniden EXA 8955 Selecting the message record time, Selecting a PIN code, » Announce only feature

Page 29

Press or multiple times to scroll through numbers on the display.

Selecting the message record time

You can set your answering system to record messages up to one or four minutes long.

One minute option: move the REC TIME switch to 1.

Four minutes option:
move the REC TIME	REC TIME
switch to 4.	ANN/4/1
switch to 4.

»Announce only feature:

The announce only feature plays an outgoing message, but it will not allow the caller to leave a message. Move the REC TIME switch to the ANN position.

The message counter LED displays “ ” when system is on standby.

Prerecorded outgoing message for Announce only feature is:

"Hello, no one is available to take your call."

Selecting a PIN code

To play your messages from a remote location, you will need to enter a two-digit Personal Identification Number (PIN) code (00-99). To select a PIN, perform the following steps.

1 On the base, press and hold pin button until a beep sounds and the LED displays 00.

2 To set the first number, press

or to scroll from 00 to 90. When the desired number appears in the display, press pin . This selects the first number.

3 To set the second number, press

or to scroll from 0 to 9. When the desired number appears in the display, press pin . This selects the second number and then the entered number is announced.

26

Image 29

Contents Page Introduction FeaturesControls and functions 50 51 52 Contents Handset Read this firstBase unit Checking the package contents Choose the best location Setting up the baseConnect the base unit If you want to install the base unit on the wall, seeIf your dialing system is Set the switch to Tone Choose the dialing modePulse If you arent sure of your dialing systemIs firmly seated Mounting the base unit on a wallStandard wall plate mounting Direct wall plate mounting Status LED Preparing the battery packWhen the battery charge becomes low Battery use time per chargeCleaning the battery contacts Do not use any liquids or solventsFrom the handset Making a callFrom the base Other OperationsHandset off the base Receiving a callHandset on the base Handset ringer tone Adjusting the ringer and ear speaker volumeLast phone number entered can be quickly redialed Redialing a callWhen speaking on the base When speaking on the handsetWhen the phone is ringing MuteFrom the handeset Storing phone numbersMaking calls with memory dialing From the handset Erasing a stored phone number Way conferencing Intercom from the handset to base To transfer from the base to the handset Transferring a callTo transfer from the handset to the base Integrated answering device IntegratedSetting the clock » Preset Message Setting your greeting» Recording your personal outgoing message Greeting » Choosing between two outgoing messagesSelecting a PIN code » Announce only featureSelecting the message record time Setting ring time switch Playing your message Using your answering systemSkipping a message Repeating a messageVoice memo Deleting a message» Deleting individual message » Deleting all messagesRecording a conversation Command Function Remote access away from homeRemote room monitor Changing the digital security code Additional InformationTo attach the beltclip To remove the beltclip Installing the beltclipHeadset installation Battery replacement and handling MaintenanceSymptom Suggestion TroubleshootingSymptom Suggestion General SpecificationsBase unit HandsetW, X, Y, Z IndexK, L Page