Uniden EXA 8955 manual Symptom Suggestion

Page 41

Symptom	Suggestion
The answering system	• Make sure the base unit is plugged
does not work.	in.
	• Make sure that the answering system
	is turned on.

Messages are	• The incoming messages may be too
incomplete.	long. Remind callers to leave a
	brief message.
	• The memory may be full. Delete
	some or all of the saved messages.

After a power failure,	• Record your greeting again.
the outgoing message	The default messages should remain.
is deleted.

No sounds on the base	• Adjust the speaker volume on the
unit speaker during call	base unit.
monitoring or message
playback.

Cannot access remote	• Make sure you are using the correct
call-in features from	PIN number.
another touch-tone	• Make sure that the touch-tone phone
phone.	you're using can transmit the tone
	for at least two seconds. If it
	cannnot, you may have to use
	another phone to access your
	message.

38

Image 41

Contents Page Introduction FeaturesControls and functions 50 51 52 Contents Handset Read this firstBase unit Checking the package contents Choose the best location Setting up the baseConnect the base unit If you want to install the base unit on the wall, seeIf your dialing system is Set the switch to Tone Choose the dialing modePulse If you arent sure of your dialing systemIs firmly seated Mounting the base unit on a wallStandard wall plate mounting Direct wall plate mounting Status LED Preparing the battery packWhen the battery charge becomes low Battery use time per chargeCleaning the battery contacts Do not use any liquids or solventsFrom the handset Making a callFrom the base Other OperationsHandset off the base Receiving a callHandset on the base Handset ringer tone Adjusting the ringer and ear speaker volumeLast phone number entered can be quickly redialed Redialing a callWhen speaking on the base When speaking on the handsetWhen the phone is ringing MuteFrom the handeset Storing phone numbersMaking calls with memory dialing From the handset Erasing a stored phone number Way conferencing Intercom from the handset to base To transfer from the base to the handset Transferring a callTo transfer from the handset to the base Integrated answering device IntegratedSetting the clock » Preset Message Setting your greeting» Recording your personal outgoing message Greeting » Choosing between two outgoing messagesSelecting a PIN code » Announce only featureSelecting the message record time Setting ring time switch Playing your message Using your answering systemSkipping a message Repeating a messageVoice memo Deleting a message» Deleting individual message » Deleting all messagesRecording a conversation Command Function Remote access away from homeRemote room monitor Changing the digital security code Additional InformationTo attach the beltclip To remove the beltclip Installing the beltclipHeadset installation Battery replacement and handling MaintenanceSymptom Suggestion TroubleshootingSymptom Suggestion General SpecificationsBase unit HandsetW, X, Y, Z IndexK, L Page