Uniden EXA 8955 manual Direct wall plate mounting

Page 12

8 On the base unit, pull the

Handset retainer

handset retainer out of the slot. Rotate it clockwise

180 degrees.

9 Flip the retainer from front to back. Slide it back into the slot so that the lip of the retainer is up and the oval is down. The retainer holds the handset

in place,

Direct wall plate mounting

If you don't have a standard wall plate, you can mount your phone directly to the wall. Before doing this, consider the following:

•Avoid electrical cables, pipes, or other items behind the mounting location, that could cause a hazard when inserting screws into the wall.

•Try to mount your phone within 10 - 15 feet of a working phone jack to avoid excessive cord lengths.

•Make sure the wall material is capable of supporting the weight of the base and handset.

TOP								1 Insert two mounting screws
							3/16 in.	1 Insert two mounting screws
							3/16 in.	into the wall, (with their
								into the wall, (with their
								appropriate anchoring device),
								appropriate anchoring device),
								3-15/16 inches apart. Allow
								about 3/16 of an inch between
							3-15/16 in.	the wall and screwheads for
								mounting the phone.
								2 Refer to steps 1 through 8 on
								page 8 to mount the telephone.

9

Image 12

Contents Page Features IntroductionControls and functions 50 51 52 Contents Read this first Base unitHandset Checking the package contents Setting up the base Choose the best locationIf you want to install the base unit on the wall, see Connect the base unitChoose the dialing mode If your dialing system is Set the switch to TonePulse If you arent sure of your dialing systemMounting the base unit on a wall Standard wall plate mountingIs firmly seated Direct wall plate mounting Preparing the battery pack Status LEDBattery use time per charge When the battery charge becomes lowCleaning the battery contacts Do not use any liquids or solventsMaking a call From the handsetFrom the base Other OperationsReceiving a call Handset on the baseHandset off the base Adjusting the ringer and ear speaker volume Handset ringer toneRedialing a call Last phone number entered can be quickly redialedWhen speaking on the handset When speaking on the baseWhen the phone is ringing MuteStoring phone numbers From the handesetMaking calls with memory dialing From the handset Erasing a stored phone number Way conferencing Intercom from the handset to base Transferring a call To transfer from the handset to the baseTo transfer from the base to the handset Integrated Integrated answering deviceSetting the clock Setting your greeting » Preset Message» Recording your personal outgoing message Greeting » Choosing between two outgoing messages» Announce only feature Selecting the message record timeSelecting a PIN code Setting ring time switch Using your answering system Playing your messageRepeating a message Skipping a messageDeleting a message Voice memo» Deleting individual message » Deleting all messagesRecording a conversation Remote access away from home Command FunctionRemote room monitor Additional Information Changing the digital security codeInstalling the beltclip Headset installationTo attach the beltclip To remove the beltclip Maintenance Battery replacement and handlingTroubleshooting Symptom SuggestionSymptom Suggestion Specifications GeneralBase unit HandsetIndex K, LW, X, Y, Z Page