Uniden EXA 8955 manual Maintenance, Battery replacement and handling

Page 39

Note on power sources

Battery replacement and handling

When the operating time becomes short, even after a battery is recharged, please replace the battery.

With normal usage, your battery should last about one year.

Please contact your place of purchase for a replacement battery.

Power Failure

During the period that the power is off, you will not be able to make or receive calls with the telephone.

RECYCLING NICKEL- CADMIUM BATTERIES

NICKEL-

CADMIUM

BATTERIES

MUST BE

DISPOSED OF

Ni-CdPROPERLY.

Nickel-cadmium cells are used in the battery pack. Please take your used nickel- cadmium battery packs to a store that recycles nickel- cadmium batteries.

Caution

•Use the specified battery pack.

•Do not remove the battery from the handset to charge it.

•Never throw the battery into a fire, disassemble it, or heat it.

•Do not remove or damage the battery casing.

Maintenance

When slightly dirty

Wipe with a soft, dry cloth.

When very dirty

Wipe with a soft cloth that has been dampened with diluted, neutral detergent. Dry with a dry cloth.

When the charging terminals become dirty

Wipe with a pencil eraser or other contact cleaner.

Caution

Do not use paint thinner, benzene, alcohol, or other chemical products. Doing so may discolor the surface of the telephone and damage the finish.

36

Image 39

Contents Page Introduction FeaturesControls and functions 50 51 52 Contents Read this first Base unitHandset Checking the package contents Choose the best location Setting up the baseConnect the base unit If you want to install the base unit on the wall, seeIf you arent sure of your dialing system Choose the dialing modeIf your dialing system is Set the switch to Tone PulseMounting the base unit on a wall Standard wall plate mountingIs firmly seated Direct wall plate mounting Status LED Preparing the battery packDo not use any liquids or solvents Battery use time per chargeWhen the battery charge becomes low Cleaning the battery contactsOther Operations Making a callFrom the handset From the baseReceiving a call Handset on the baseHandset off the base Handset ringer tone Adjusting the ringer and ear speaker volumeLast phone number entered can be quickly redialed Redialing a callMute When speaking on the handsetWhen speaking on the base When the phone is ringingFrom the handeset Storing phone numbersMaking calls with memory dialing From the handset Erasing a stored phone number Way conferencing Intercom from the handset to base Transferring a call To transfer from the handset to the baseTo transfer from the base to the handset Integrated answering device IntegratedSetting the clock » Choosing between two outgoing messages Setting your greeting» Preset Message » Recording your personal outgoing message Greeting» Announce only feature Selecting the message record timeSelecting a PIN code Setting ring time switch Playing your message Using your answering systemSkipping a message Repeating a message» Deleting all messages Deleting a messageVoice memo » Deleting individual messageRecording a conversation Command Function Remote access away from homeRemote room monitor Changing the digital security code Additional InformationInstalling the beltclip Headset installationTo attach the beltclip To remove the beltclip Battery replacement and handling MaintenanceSymptom Suggestion TroubleshootingSymptom Suggestion Handset SpecificationsGeneral Base unitIndex K, LW, X, Y, Z Page