Uniden EXA 8955 manual Battery use time per charge, When the battery charge becomes low

Page 14

Even when the battery pack is not being used, it will gradually discharge over a long period. For optimum performance, be sure to return the handset to the base unit after a telephone call for charging the battery.

Battery use time (per charge)

From fully charged

Seven hours coutinuous use.

Seven days when the handset is in the standby mode.

When the battery charge becomes low

When the voltage of battery pack in the handset is very low and needs to be charged, the phone is programmed to eliminate functions in order to save power. If the battery charge becomes low Battery LED blinks. If the phone is in use, the handset beeps. Complete your conversation as quickly as possible and return the handset to the base unit for charging.

Rechargeable batteries have a memory effect that reduces standby and talk time. To avoid this memory effect, on a monthly basis, use the phone until the Battery lamp blinks. Then charge the battery for 15 hours.

Cleaning the battery contacts

To maintain a good charge, it is important to clean the battery contacts on the handset and base unit about once a month. Use a pencil eraser or other contact cleaner.

Do not use any liquids or solvents.

11

Image 14
Contents Page Features IntroductionControls and functions 50 51 52 Contents Handset Read this firstBase unit Checking the package contents Setting up the base Choose the best locationIf you want to install the base unit on the wall, see Connect the base unitPulse Choose the dialing modeIf your dialing system is Set the switch to Tone If you arent sure of your dialing systemIs firmly seated Mounting the base unit on a wallStandard wall plate mounting Direct wall plate mounting Preparing the battery pack Status LEDCleaning the battery contacts Battery use time per chargeWhen the battery charge becomes low Do not use any liquids or solventsFrom the base Making a callFrom the handset Other OperationsHandset off the base Receiving a callHandset on the base Adjusting the ringer and ear speaker volume Handset ringer toneRedialing a call Last phone number entered can be quickly redialedWhen the phone is ringing When speaking on the handsetWhen speaking on the base MuteStoring phone numbers From the handesetMaking calls with memory dialing From the handset Erasing a stored phone number Way conferencing Intercom from the handset to base To transfer from the base to the handset Transferring a callTo transfer from the handset to the base Integrated Integrated answering deviceSetting the clock » Recording your personal outgoing message Greeting Setting your greeting» Preset Message » Choosing between two outgoing messagesSelecting a PIN code » Announce only featureSelecting the message record time Setting ring time switch Using your answering system Playing your messageRepeating a message Skipping a message» Deleting individual message Deleting a messageVoice memo » Deleting all messagesRecording a conversation Remote access away from home Command FunctionRemote room monitor Additional Information Changing the digital security codeTo attach the beltclip To remove the beltclip Installing the beltclipHeadset installation Maintenance Battery replacement and handlingTroubleshooting Symptom SuggestionSymptom Suggestion Base unit SpecificationsGeneral HandsetW, X, Y, Z IndexK, L Page