Uniden EXA 8955 manual Setting the clock

Page 27

Press or multiple times to scroll through days, hours, minutes, etc.

If you don't set the clock within two minutes, the system returns to standby.

Setting up your answering system Turning the answering system on/off

1 To turn the answering system on, press ans on/off . A beep tone will sound and the current greeting message is played.

2 To turn the answering system off, press ans on/off again.

Setting the clock

The clock on EXA8955 Answer System starts when power is applied to the base. Follow these steps to set the clock to the correct time.

1 Press and hold clock until a beep tone sounds.

2 First, press or until the correct day of the week is announced. (Number zero through six displays on the base as each day is announced.) Press clock again to select the day.

3 Next, press or until you hear the correct hour setting. Numbers 1 through 12 display on the base as each hour is announced. Press clock again to select the correct time.

4 Press or until you hear the correct time setting. Numbers 1 through 59 display on the base as each minute is announced. Press clock again to select the correct time.

5 The LED displays an A or P. Press or until you hear the correct AM/PM setting.

6 Press clock again to end the time/day setting. The EXA8955	24
announces the time that you have set.

Image 27

Contents Page Introduction FeaturesControls and functions 50 51 52 Contents Read this first Base unitHandset Checking the package contents Choose the best location Setting up the baseConnect the base unit If you want to install the base unit on the wall, seeIf you arent sure of your dialing system Choose the dialing modeIf your dialing system is Set the switch to Tone PulseMounting the base unit on a wall Standard wall plate mountingIs firmly seated Direct wall plate mounting Status LED Preparing the battery packDo not use any liquids or solvents Battery use time per chargeWhen the battery charge becomes low Cleaning the battery contactsOther Operations Making a callFrom the handset From the baseReceiving a call Handset on the baseHandset off the base Handset ringer tone Adjusting the ringer and ear speaker volumeLast phone number entered can be quickly redialed Redialing a callMute When speaking on the handsetWhen speaking on the base When the phone is ringingFrom the handeset Storing phone numbersMaking calls with memory dialing From the handset Erasing a stored phone number Way conferencing Intercom from the handset to base Transferring a call To transfer from the handset to the baseTo transfer from the base to the handset Integrated answering device IntegratedSetting the clock » Choosing between two outgoing messages Setting your greeting» Preset Message » Recording your personal outgoing message Greeting» Announce only feature Selecting the message record timeSelecting a PIN code Setting ring time switch Playing your message Using your answering systemSkipping a message Repeating a message» Deleting all messages Deleting a messageVoice memo » Deleting individual messageRecording a conversation Command Function Remote access away from homeRemote room monitor Changing the digital security code Additional InformationInstalling the beltclip Headset installationTo attach the beltclip To remove the beltclip Battery replacement and handling MaintenanceSymptom Suggestion TroubleshootingSymptom Suggestion Handset SpecificationsGeneral Base unitIndex K, LW, X, Y, Z Page