Uniden EXAI 7980 owner manual Dn »key to scroll through the characters

Page 20

Memory storing (continued)

4 Use the ¥up ,		dn », #/ 1 , */tone/0 , or delete keys to enter the name.
The name cannot exceed 16 characters.
• Use the	¥up	and dn »key to scroll through the characters.
• Use the	#/ 1	and */tone/0 to move the cursor to the desired position.
• Use the	delete	key to delete characters as needed.

5	Press select .
	“Store	Number” is displayed. The cursor
	flashes indicating that the display is ready for the
	number to be entered.
6	Use the keypad, */tone/0 , #/ 1 , or
	redial/p keys to enter the phone number.
	The phone number can be up to 16 digits.
	• Use the	redial/p key to enter pause in the

dialing sequence. The display shows a “P”.

Store Number

Store Number 817858330

Note The pause feature is useful for long distance calling, credit card dialing, or sequences that reguire a pause between digits.

• Use the delete key to delete digits needed.

7 Press select .

The handset beeps and displays the confirmation screen. Memory storage is complete.

For example if you store a name and number into

memory location number 7, the display shows	Memory 7 Stored
memory location number 7, the display shows
“Memory 7 Stored”.
After about 2 seconds, “Memory Store”		Memory Store
is displayed.	7	<Memory 7>
	8

20

Image 20

Contents Exai Features IntroductionTable of contents Read this first 6 to9 to10 11 toChecking the package contents StepSetting up the base unit Choose the best locationConnect the base unit Choose the dialing mode TipsPreparing the battery pack Cleaning the battery contacts Battery use time per chargeWhen the battery charge becomes low Setting Caller ID options Entering your area code Making calls On-hook dialingOff-hook dialing Off-hook redialing RedialingOn-hook redialing Auto Talk when ringing Any key when ringingAny key when paging Receiving callsHandset ear speaker volume Handset ringer toneReceiving a call from the base Base ringer switchBase speaker volume Memory storing Storing phone numbers and namesDn »key to scroll through the characters On-hook dialing Memory dialingMaking calls with memory dialing Off-hook dialing Display a Programmed NumberMemory editing Editing a stored name and/or phone numberUse the #/ 1 and */tone/0 Memory erasing Erasing a stored name and/or phone numberCaller ID service Caller IDWhen the telephone rings Here are some typical displaysLong Distance call settings and cancellation Viewing the Caller ID Message listDeleting information from the Caller ID list Deleting a Caller ID messageDeleting all Caller ID name/numbers Long Distance calls Using the Caller ID listCalling a party from the Caller ID list Storing Caller ID messages in Memory Using Caller ID with call waiting service Using the answering machine Setting the clockRecording the greeting Changing the greetingSetting the number of rings Turning the answering machine on and offSetting the toll saver switch Setting maximum recording time for incoming messagesPlaying recorded messages Deleting recorded messages Screening incoming callsLeaving a voice memo Recording a phone conversation 2-way REC Selecting a PIN code Remote access Remote room monitor When speaking on the handset When speaking on the baseAdditional information Way conversationChanging the digital security code Mounting the base unit on a wall Standard wall plate mountingDirect wall plate mounting To attach the beltclip To remove the beltclip Installing the beltclipHeadset installation Power Failure MaintenanceBattery replacement and handling Troubleshooting Symptom SuggestionAdditional information Specifications GeneralBase unit HandsetIndex G, HK, L W, X, Y, ZPage Uniden America Corporation