Uniden EXAI 7980 owner manual Direct wall plate mounting

Page 48

Additional information (continued)

8 On the base unit, pull the handset

Handset retainer

retainer out of the slot. Rotate it clock- wise 180 degrees.

9 Flip the retainer from front to back. Slide it back into the slot so that the lip of the retainer is up and the oval is down. The retainer holds the handset in place,

[Direct wall plate mounting]

If you don't have a standard wall plate, you can mount your phone directly to the wall. Before doing this, consider the following:

•Avoid electrical cables, pipes, or other items behind the mounting location. That could cause a hazard when inserting screws into the wall.

•Try to mount your phone within 10 - 15 feet of a working phone jack to avoid excessive cord lengths.

•Make sure the wall material is capable of supporting the weight of the base and handset.

TOP

3/16 in.

3-15/16 in.

1 Insert two mounting screws into the wall, (with their appropriate anchoring device), 3-15/16 inches apart. Allow about 3/16 of an inch between the wall and screwheads for mounting the phone.

2 Refer to steps 1 through 8 on page 47 to mount the telephone.

48

Image 48

Contents Exai Features IntroductionTable of contents Read this first 6 to9 to10 11 toChecking the package contents StepSetting up the base unit Choose the best locationConnect the base unit Choose the dialing mode TipsPreparing the battery pack Battery use time per charge When the battery charge becomes lowCleaning the battery contacts Setting Caller ID options Entering your area code Making calls On-hook dialingOff-hook dialing Redialing On-hook redialingOff-hook redialing Auto Talk when ringing Any key when ringingAny key when paging Receiving callsHandset ear speaker volume Handset ringer toneBase ringer switch Base speaker volumeReceiving a call from the base Memory storing Storing phone numbers and namesDn »key to scroll through the characters Memory dialing Making calls with memory dialingOn-hook dialing Off-hook dialing Display a Programmed NumberMemory editing Editing a stored name and/or phone numberUse the #/ 1 and */tone/0 Memory erasing Erasing a stored name and/or phone numberCaller ID service Caller IDWhen the telephone rings Here are some typical displaysLong Distance call settings and cancellation Viewing the Caller ID Message listDeleting information from the Caller ID list Deleting a Caller ID messageDeleting all Caller ID name/numbers Using the Caller ID list Calling a party from the Caller ID listLong Distance calls Storing Caller ID messages in Memory Using Caller ID with call waiting service Using the answering machine Setting the clockRecording the greeting Changing the greetingSetting the number of rings Turning the answering machine on and offSetting the toll saver switch Setting maximum recording time for incoming messagesPlaying recorded messages Deleting recorded messages Screening incoming callsLeaving a voice memo Recording a phone conversation 2-way REC Selecting a PIN code Remote access Remote room monitor When speaking on the handset When speaking on the baseAdditional information Way conversationChanging the digital security code Mounting the base unit on a wall Standard wall plate mountingDirect wall plate mounting Installing the beltclip Headset installationTo attach the beltclip To remove the beltclip Maintenance Battery replacement and handlingPower Failure Troubleshooting Symptom SuggestionAdditional information Specifications GeneralBase unit HandsetIndex G, HK, L W, X, Y, ZPage Uniden America Corporation