Uniden EXAI 7980 owner manual Setting up the base unit, Choose the best location

Page 6

Step 2

Setting up the base unit

Do the following steps.

•Choose the best location

•Connect the base unit

•Choose the dialing mode

Choose the best location

Before choosing a location for your new phone, read the INSTALLATION CONSIDERA- TIONS included in the PRECAUTIONS AND IMPORTANT SAFETY INSTRUCTIONS brochure. Here are some important guidelines you should consider:

Avoid heat sources, such as radiators, air ducts, and sunlight

Avoid television sets and other electronic equipment

Avoid noise sources such as a window by a street with heavy traffic

Avoid microwave oven

Avoid excessive moisture, extremely low temperatures, dust, mechanical vibration, or shock

Choose a central location

Avoid personal computers

Avoid other cordless telephone

•You should charge your handset for 15-20 hours before using the phone.

•The location should be close to both a phone jack and continuous a power outlet which is not switchable.

•Keep the base and handset away from sources of electrical noise such as motors and fluorescent lighting.

•Be sure there is sufficient space to raise the base antenna fully vertical.

•The base can be placed on a desk, tabletop or mounted on a standard wall plate.

6

Image 6

Contents Exai Features IntroductionTable of contents 9 to10 Read this first6 to 11 toChecking the package contents StepSetting up the base unit Choose the best locationConnect the base unit Choose the dialing mode TipsPreparing the battery pack Battery use time per charge When the battery charge becomes lowCleaning the battery contacts Setting Caller ID options Entering your area code Making calls On-hook dialingOff-hook dialing Redialing On-hook redialingOff-hook redialing Any key when paging Auto Talk when ringingAny key when ringing Receiving callsHandset ear speaker volume Handset ringer toneBase ringer switch Base speaker volumeReceiving a call from the base Memory storing Storing phone numbers and namesDn »key to scroll through the characters Memory dialing Making calls with memory dialingOn-hook dialing Off-hook dialing Display a Programmed NumberMemory editing Editing a stored name and/or phone numberUse the #/ 1 and */tone/0 Memory erasing Erasing a stored name and/or phone numberCaller ID service Caller IDWhen the telephone rings Here are some typical displaysLong Distance call settings and cancellation Viewing the Caller ID Message listDeleting information from the Caller ID list Deleting a Caller ID messageDeleting all Caller ID name/numbers Using the Caller ID list Calling a party from the Caller ID listLong Distance calls Storing Caller ID messages in Memory Using Caller ID with call waiting service Using the answering machine Setting the clockRecording the greeting Changing the greetingSetting the number of rings Turning the answering machine on and offSetting the toll saver switch Setting maximum recording time for incoming messagesPlaying recorded messages Deleting recorded messages Screening incoming callsLeaving a voice memo Recording a phone conversation 2-way REC Selecting a PIN code Remote access Remote room monitor Additional information When speaking on the handsetWhen speaking on the base Way conversationChanging the digital security code Mounting the base unit on a wall Standard wall plate mountingDirect wall plate mounting Installing the beltclip Headset installationTo attach the beltclip To remove the beltclip Maintenance Battery replacement and handlingPower Failure Troubleshooting Symptom SuggestionAdditional information Base unit SpecificationsGeneral HandsetK, L IndexG, H W, X, Y, ZPage Uniden America Corporation