Uniden EXAI 7980 owner manual Using the answering machine, Setting the clock

Page 34

Using the answering machine

Setting the clock

The answering machine’s clock starts when the AC adapter cord is plugged in.

skip

1

2

3

4

5

Press clock until you hear the long beep.

First set the day by pressing repeat or skip .

When the number appears on the LED display, press clock .

The unit announces the day currently selected.

Next set the hour by pressing repeat or skip . When the correct

numbers appear in the LED display, press clock .

Then set the Minute by pressing repeat or skip . When the correct

numbers appear in the LED display, press clock .

Lastly, set AM/PM by pressing repeat or skip . The LED display

will show A (AM) and P (PM) in turn. At the correct one, press clock . You will hear a long beep.

Then you will hear the new day and time.

Notes • You can hear the current time set by pressing clock .

•If a call comes in during clock setting, start over after the call.

•In case of power interruption, the clock stops. You must reprogram the time once power is restored.

•If you begin to set the clock, and you pause for more than two minutes, the unit returns to standby.

34

Image 34

Contents Exai Features IntroductionTable of contents 9 to10 Read this first6 to 11 toChecking the package contents StepSetting up the base unit Choose the best locationConnect the base unit Choose the dialing mode TipsPreparing the battery pack When the battery charge becomes low Battery use time per chargeCleaning the battery contacts Setting Caller ID options Entering your area code Making calls On-hook dialingOff-hook dialing On-hook redialing RedialingOff-hook redialing Any key when paging Auto Talk when ringingAny key when ringing Receiving callsHandset ear speaker volume Handset ringer toneBase speaker volume Base ringer switchReceiving a call from the base Memory storing Storing phone numbers and namesDn »key to scroll through the characters Making calls with memory dialing Memory dialingOn-hook dialing Off-hook dialing Display a Programmed NumberMemory editing Editing a stored name and/or phone numberUse the #/ 1 and */tone/0 Memory erasing Erasing a stored name and/or phone numberCaller ID service Caller IDWhen the telephone rings Here are some typical displaysLong Distance call settings and cancellation Viewing the Caller ID Message listDeleting information from the Caller ID list Deleting a Caller ID messageDeleting all Caller ID name/numbers Calling a party from the Caller ID list Using the Caller ID listLong Distance calls Storing Caller ID messages in Memory Using Caller ID with call waiting service Using the answering machine Setting the clockRecording the greeting Changing the greetingSetting the number of rings Turning the answering machine on and offSetting the toll saver switch Setting maximum recording time for incoming messagesPlaying recorded messages Deleting recorded messages Screening incoming callsLeaving a voice memo Recording a phone conversation 2-way REC Selecting a PIN code Remote access Remote room monitor Additional information When speaking on the handsetWhen speaking on the base Way conversationChanging the digital security code Mounting the base unit on a wall Standard wall plate mountingDirect wall plate mounting Headset installation Installing the beltclipTo attach the beltclip To remove the beltclip Battery replacement and handling MaintenancePower Failure Troubleshooting Symptom SuggestionAdditional information Base unit SpecificationsGeneral HandsetK, L IndexG, H W, X, Y, ZPage Uniden America Corporation