Uniden EXAI 7980 owner manual Changing the digital security code

Page 46

Additional information (continued)

Changing the digital security code

The digital security code is an identification code used to connect the handset and the base unit. Normally, setting the code is not necessary.

The first time you charge your handset, the security code is automatically set. (See page 4.)

In the rare situation that you suspect another cordless telephone is using the same security code, you can change the code.

1 Place the handset on the base unit. Press page .

The handset beeps.

2 Remove the handset from the base unit.

3 Place the handset on the base unit. Leave the handset on the base for at least 3 seconds. A new random security code is set.

Note

If the handset battery pack is completely discharged or the battery pack removed, the digital security code will be lost. If this happens, a new security code is set automatically the next time the battery pack is charged.

46

Image 46

Contents Exai Features IntroductionTable of contents 9 to10 Read this first6 to 11 toChecking the package contents StepSetting up the base unit Choose the best locationConnect the base unit Choose the dialing mode TipsPreparing the battery pack When the battery charge becomes low Battery use time per chargeCleaning the battery contacts Setting Caller ID options Entering your area code Making calls On-hook dialingOff-hook dialing On-hook redialing RedialingOff-hook redialing Any key when paging Auto Talk when ringingAny key when ringing Receiving callsHandset ear speaker volume Handset ringer toneBase speaker volume Base ringer switchReceiving a call from the base Memory storing Storing phone numbers and namesDn »key to scroll through the characters Making calls with memory dialing Memory dialingOn-hook dialing Off-hook dialing Display a Programmed NumberMemory editing Editing a stored name and/or phone numberUse the #/ 1 and */tone/0 Memory erasing Erasing a stored name and/or phone numberCaller ID service Caller IDWhen the telephone rings Here are some typical displaysLong Distance call settings and cancellation Viewing the Caller ID Message listDeleting information from the Caller ID list Deleting a Caller ID messageDeleting all Caller ID name/numbers Calling a party from the Caller ID list Using the Caller ID listLong Distance calls Storing Caller ID messages in Memory Using Caller ID with call waiting service Using the answering machine Setting the clockRecording the greeting Changing the greetingSetting the number of rings Turning the answering machine on and offSetting the toll saver switch Setting maximum recording time for incoming messagesPlaying recorded messages Deleting recorded messages Screening incoming callsLeaving a voice memo Recording a phone conversation 2-way REC Selecting a PIN code Remote access Remote room monitor Additional information When speaking on the handsetWhen speaking on the base Way conversationChanging the digital security code Mounting the base unit on a wall Standard wall plate mountingDirect wall plate mounting Headset installation Installing the beltclipTo attach the beltclip To remove the beltclip Battery replacement and handling MaintenancePower Failure Troubleshooting Symptom SuggestionAdditional information Base unit SpecificationsGeneral HandsetK, L IndexG, H W, X, Y, ZPage Uniden America Corporation