Uniden EXAI 7980 owner manual Choose the dialing mode, Tips

Page 8

Step 2 (continued)

Notes

•Use only the supplied AD-420 AC adapter. Do not use any other AC adapter.

•Place the base unit close to the AC outlet so that you can unplug the AC adapter easily.

Tips

•If your telephone outlet isn't modular, contact your telephone company for assistance.

Polarity of the plug

Modular

Choose the dialing mode

PULSE TONE

Depending on your dialing system, set the TONE/PULSE switch as follows:

If your dialing system is Set the switch to

ToneTONE

PulsePULSE

If you aren't sure of your dialing system

Make a trial call with the TONE/PULSE switch set to TONE.

If the call connects, leave the switch as is; otherwise, set to PULSE.

8

Image 8

Contents Exai Features IntroductionTable of contents Read this first 6 to9 to10 11 toChecking the package contents StepSetting up the base unit Choose the best locationConnect the base unit Choose the dialing mode TipsPreparing the battery pack Cleaning the battery contacts Battery use time per chargeWhen the battery charge becomes low Setting Caller ID options Entering your area code Making calls On-hook dialingOff-hook dialing Off-hook redialing RedialingOn-hook redialing Auto Talk when ringing Any key when ringingAny key when paging Receiving callsHandset ear speaker volume Handset ringer toneReceiving a call from the base Base ringer switchBase speaker volume Memory storing Storing phone numbers and namesDn »key to scroll through the characters On-hook dialing Memory dialingMaking calls with memory dialing Off-hook dialing Display a Programmed NumberMemory editing Editing a stored name and/or phone numberUse the #/ 1 and */tone/0 Memory erasing Erasing a stored name and/or phone numberCaller ID service Caller IDWhen the telephone rings Here are some typical displaysLong Distance call settings and cancellation Viewing the Caller ID Message listDeleting information from the Caller ID list Deleting a Caller ID messageDeleting all Caller ID name/numbers Long Distance calls Using the Caller ID listCalling a party from the Caller ID list Storing Caller ID messages in Memory Using Caller ID with call waiting service Using the answering machine Setting the clockRecording the greeting Changing the greetingSetting the number of rings Turning the answering machine on and offSetting the toll saver switch Setting maximum recording time for incoming messagesPlaying recorded messages Deleting recorded messages Screening incoming callsLeaving a voice memo Recording a phone conversation 2-way REC Selecting a PIN code Remote access Remote room monitor When speaking on the handset When speaking on the baseAdditional information Way conversationChanging the digital security code Mounting the base unit on a wall Standard wall plate mountingDirect wall plate mounting To attach the beltclip To remove the beltclip Installing the beltclipHeadset installation Power Failure MaintenanceBattery replacement and handling Troubleshooting Symptom SuggestionAdditional information Specifications GeneralBase unit HandsetIndex G, HK, L W, X, Y, ZPage Uniden America Corporation