Uniden XC3545 Setting the Tone/Pulse Switch, Adjusting Ringer/Volume Controls

Page 27

Setting the Tone/Pulse Switch

Be sure the TONE/PULSE switch is in the TONE position.

TONE-PULSE

Note: Most phone systems are Tone dialing. Check with your local phone company if you are not sure whether your system is Tone or Pulse dialing.

Adjusting Ringer/Volume Controls

The Handset and Base of the :+!#"#have controls to adjust their volumes.

Handset Volume Controls

To adjust the ringer volume of your Handset, press L when the phone is not in use.

You can also select one of two different ringer tones for the Handset.

Press Oto select a different ringer tone when the phone is not in use.

OPER

0

TONE

MEM 1 2 3

FLASH VOLUME

INT'C R.TONE R.VOL

Handset Ringer Volume

Control

OPER

0

TONE

MEM 1 2 3

FLASH VOLUME

R.TONE R.VOL RDL/P

Handset Ringer Tone

Select Button

27

Image 27

Contents Table of Contents Important Safety Instructions Page Introduction FeaturesIncluded with the XC3545 Telephone Line Problems Important Electrical ConsiderationsRange More Than One Cordless Telephone Radio InterferenceInstallation Selecting a LocationTelephone Line Outlets Applying Power to the Base Unit Connecting the Telephone CordsDesk or Tabletop Installation Adapter Safety FeaturePage Page Wall Installation Placement of the HandsetStandard Wall Plate Mounting Page Page Direct Wall Mounting Page Page Setting the Handset Retainer Put the retainer back into its slot on the Base Unit Setting up your Phone Installing the Handset Battery PackExtending the Antenna BLK RED Cleaning the Battery Contacts Initial Battery Charging Charging the Battery PackContinuous Battery Charging During a Call Standby Mode Low Battery IndicatorSetting the Tone/Pulse Switch Adjusting Ringer/Volume ControlsHandset Volume Controls Base Volume Controls Automatic Digital Code Security ExtendAPhone ExtendAPhone Making and Receiving Calls Using your XC3545TALK/BA LOW LED will Changing Channels, Hold, Mute, and FlashUsing Page/Intercom Way PagingPaging the Base Unit Paging the Handset Transferring a CallINT’COM LED Transferring a Call from the HandsetTransferring a Call from the Base To turn the monitor off Room Monitor FeatureProgramming your Phone Storing a Number in MemoryHandset Operation Tone indicates that the number is stored USE LED blinks Base OperationPress Magain Enter the memory location Storing a Tone/Pulse Number With a Pulse Dial System 3300 Enter the number to be Tone indicates that the number is stored Storing One-Touch Dialing Numbers Channel Press M Tone indicates that the number is stored Chain Dialing Dialing a Stored NumberErasing a Stored Number Problem Suggestion TroubleshootingHandset XC3545 Precautions Handset Controls and Keys Base Unit Controls and Keys One Year Limited Warranty Covered under one or more of the following U.S. patents