Uniden XC3545 important safety instructions Handset

Page 54

Specifications

General – The :+!#"#complies with FCC Part 15 and 68

Frequency ControlCrystal controlled transmission

ModulationFM

Operating Temperature – 10° to 50° C

Base Unit

Receive Frequency	48.76 to 49.99 MHz (25 Channels)
Transmit Frequency	43.72 to 46.97 MHz (25 Channels)
Power Requirements	120V AC 60 Hz
Size	7 43 in (W) x 5 3217 in (D) x 1 87 in (H)
Weight	Approx. 15.7 oz.
Handset
Receive Frequency	43.72 to 46.97 MHz (25 Channels)
Transmit Frequency	48.76 to 49.99 MHz (25 Channels)
Power Requirements	Rechargeable Ni-Cd Battery Pack
Size	2	3	in (W) x 2 1611 in (D) x 12		3	in (H) (w/
		16			32
	antenna)
Weight	Approx. 10 oz. (including battery)
Battery	BT-185
	Capacity			270 mAh, 3.6V
	Talk Mode			6 hours
	Standby Mode			7 days
	Battery Save Mode			5 weeks

Specifications, Features, and availability of Optional Accessories are all subject to change without prior notice.

54

Image 54

Contents Table of Contents Important Safety Instructions Page Features IntroductionIncluded with the XC3545 Telephone Line Problems Important Electrical ConsiderationsRange Radio Interference More Than One Cordless TelephoneInstallation Selecting a LocationTelephone Line Outlets Connecting the Telephone Cords Applying Power to the Base UnitAdapter Safety Feature Desk or Tabletop InstallationPage Page Wall Installation Placement of the HandsetStandard Wall Plate Mounting Page Page Direct Wall Mounting Page Page Setting the Handset Retainer Put the retainer back into its slot on the Base Unit Setting up your Phone Installing the Handset Battery PackExtending the Antenna BLK RED Cleaning the Battery Contacts Charging the Battery Pack Initial Battery ChargingContinuous Battery Charging Low Battery Indicator During a Call Standby ModeSetting the Tone/Pulse Switch Adjusting Ringer/Volume ControlsHandset Volume Controls Base Volume Controls Automatic Digital Code Security ExtendAPhone ExtendAPhone Using your XC3545 Making and Receiving CallsChanging Channels, Hold, Mute, and Flash TALK/BA LOW LED willUsing Page/Intercom Way PagingPaging the Base Unit Transferring a Call Paging the HandsetTransferring a Call from the Handset INT’COM LEDTransferring a Call from the Base Room Monitor Feature To turn the monitor offProgramming your Phone Storing a Number in MemoryHandset Operation Tone indicates that the number is stored Base Operation USE LED blinksPress Magain Enter the memory location Storing a Tone/Pulse Number With a Pulse Dial System 3300 Enter the number to be Tone indicates that the number is stored Storing One-Touch Dialing Numbers Channel Press M Tone indicates that the number is stored Dialing a Stored Number Chain DialingErasing a Stored Number Troubleshooting Problem SuggestionHandset XC3545 Precautions Handset Controls and Keys Base Unit Controls and Keys One Year Limited Warranty Covered under one or more of the following U.S. patents