Uniden important safety instructions Using your XC3545, Making and Receiving Calls

Using your XC3545

The :+!#"#has dual keypads: one in the Handset, and one on the Base Unit. This is like having two phones because most operations can be performed using either the Handset or the Base Units.

Making and Receiving Calls

The following features of your :+!#"#phone are different depending on the Handset’s location when you make or receive a call.

		HANDSET				BASE UNIT
	ON BASE UNIT		OFF BASE UNIT
ANSWER	Pick up Handset		PressT		1)	PressK
CALL	(AutoTalk)					The speaker
						LED lights.
					2)	Talk into the
						microphone.
						Note: A call
						causes the
						IN USE LED to
						blink.
	1)	Pick up	1)	PressT	1)	PressK
		Handset	2)	Listen for dial	2)	Listen for dial
MAKE	2)	PressT		tone		tone
CALL	3)	Listen for dial	3)	Dial number	3)	Dial number
		tone
	4)	Dial number
HANG		PressT			PressK
UP					The speaker LED
		— OR —			goes off.
		eturn Handset to Base
		(AutoStandby)
	1)	Pick up	1)	PressT	1)	PressK
		Handset	2)	Listen for dial		The speaker
REDIAL	2)	PressT		tone		LED lights.
	3)	Listen for dial	3)	PressR	2)	Listen for dial
		tone				tone
	4)	PressR			3)	PressR

Note: Sometimes when you press Tto hang up the phone, you may get an error tone and the phone will not disconnect. If this happens, place the Handset on the Base Unit or press Tagain while holding the Handset close to the Base Unit.

32