Controls and displays
Chapter 2
Controls and displays
Top and front panel | Rear panel |
02
English Deutsch
12
3 4
1 iPod connector port
Insert your iPod dock connector port to connect and recharge your iPod unit.
2 iPod type adapter pocket
Holds the iPod type adapter that matches your iPod unit.
IN |
| OUTPUT |
| DC IN 12 V |
CONTROL | S - VIDEO | VIDEO |
| R AUDIO L |
1 | 2 | 3 | 4 | 5 |
1 CONTROL IN terminal
Connect this to a Pioneer AV receiver (or similar component) CONTROL OUT terminal using the supplied SR cable. This allows you to use the receiver's remote to control this unit. Check your Pioneer receiver's operating
instructions for more on this.1
2 S-VIDEO output terminal
Use to connect an
3 VIDEO output terminal
Connect a standard (composite) video cable to your TV/AV receiver to view the
4 AUDIO output terminal
Français Italiano Nederlands Español
3 Power indicator
Lights when your iPod is connected to the dock connector port.
4 Remote sensor
See Range of the remote control unit on page 5 for more on this.
Use to connect a stereo RCA/phono terminal cable to your AV receiver /power amplifier for
5 AC adapter DC IN 12 V terminal
Use to connect the AC adapter to an AC power outlet.
Note
1If you have connected an SR cable to this terminal, you must point the remote control supplied with this unit at the remote sensor of the connected receiver or amplifier.
7
En