already installed. This software must be installed only if the drive fails to appear on your desktop after completing the instructions in Connecting Rover.
To download and install the USB Mass Storage Support update for Mac OS 8.6, go to Apple’s support website at www.apple.com/support/ and search for "USB Mass Storage Support." (You may need to register with Apple and create an Apple ID.) Once you have successfully located the update, follow the instructions on the web page for help with downloading and installing it.
If you are running Mac OS 9 or Mac OS X, no software installation is required; just proceed to the next step, Connecting Rover.
Connecting Rover
Remove the cap from your Rover and insert it into an available USB 1.1 or
2.0port on your computer. Press the PLAY/PAUSE button on the top of your Rover to power it on. You should see information appear on the LCD.
If you need to plug your Rover into a USB connector that is inconveniently located (such as in the rear of a desktop computer) or has adjoining cables that interfere with the Rover connection, use the included USB Extension Cable to connect between the computer’s USB port and the Rover.
After insertion (and possible driver installation) your Rover will appear as a new disk on your Windows computer (in My Computer) or Mac OS system (on the desktop).
Copy MP3 Files from your Computer to Rover
After connecting your Rover to your computer, use your operating system to drag or copy a few of your MP3 files from your computer to the disk representing your Rover.
2