ViewSonic NMP-500 manual Setup, Manually Configure Your PC

Page 10

SETUP

IMPORTANT! BE SURE TO CONFIGURE THE NMP-500 AS SHOWN IN THE FOLLOWING STEPS BEFORE CONNECTING TO THE NETWORK!

1. CONNECT NMP-500 TO PC

Use an Ethernet cable to connect the NMP-500. Use the AC power adapter included to connect the NMP-500to an AC power source like a wall outlet.

Ethernet cable

NMP-500

AC power	Server
adapter

2.MANUALLY CONFIGURE YOUR PC

Using Windows XP, click the Windows Start button in the task bar > right-click on My Network Places > select Properties > right-click on the Network Connection associated with your Network Adapter and select Properties > click Internet Protocol (TCP/IP) and click Properties.

Enter a Static IP Address for example 192.168.12.x, in the same range as the NMP-500.

ViewSonic NMP-500

6 of 38

Image 10

Contents Page Product Registration Contents Actions Packaged Contents IntroductionRequirements System RequirementsFeatures TWO Modes of CommunicationTWO Modes of Operation StandaloneFront View Remote ControlBack View Setup Manually Configure Your PCLogin Connect the NMP-500TO a DisplayDVI Put Batteries in Remote Control Startup URLS/NETWORK Configuration ManagementBrowser Configuration ViewSonic NMP-500 VNC Client VIDEO/AUDIO Configuration TAS Configuration System Services Configuration Actions Video MulticastVideo Http Playlist To create a playlistVNC Client Transparency GO to URL Administration Advanced Video ConfigurationSecurity Save Configuration Default SettingsReboot Firmware UpgradeHelp StatusLicense AboutCompliance and Safety Notices AppendixCanadian compliance notice For EU-member states only as follows Screens Actions Administration Help Customer Support = FAXSpecifications CvbxLimited Warranty ViewSonic Limited Warranty Terms and ConditionsLimitation of Implied Warranties