ViewSonic NMP-500 manual VNC Client

Page 24

VNC CLIENT

The VNC (Virtual Network Computing) client screen allows you to connect and display a remote desktop running a VNC server.

1In the VNC server field, type the IP Address of the VNC server.

2In the Password field, type the password of the VNC server whose IP is entered above. IMPORTANT! The password must be at least six (6) characters (can be alpha-numeric).

3To display the remote desktop click Start.

ViewSonic NMP-500

20 of 38

Image 24

Contents Page Product Registration Contents Actions Packaged Contents IntroductionRequirements System RequirementsFeatures TWO Modes of CommunicationTWO Modes of Operation StandaloneRemote Control Front ViewBack View Setup Manually Configure Your PCLogin Connect the NMP-500TO a DisplayDVI Put Batteries in Remote Control Startup URLS/NETWORK Configuration ManagementBrowser Configuration ViewSonic NMP-500 VNC Client VIDEO/AUDIO Configuration TAS Configuration System Services Configuration Actions Video MulticastVideo Http Playlist To create a playlistVNC Client Transparency GO to URL Administration Advanced Video ConfigurationSecurity Save Configuration Default SettingsReboot Firmware UpgradeHelp StatusLicense AboutCompliance and Safety Notices AppendixCanadian compliance notice For EU-member states only as follows Screens Actions Administration Help Customer Support = FAXSpecifications CvbxLimited Warranty ViewSonic Limited Warranty Terms and ConditionsLimitation of Implied Warranties