ViewSonic NMP-500 manual System Services Configuration

Page 20

SYSTEM SERVICES CONFIGURATION

Configure System Services in the MIB (Management Information Base) to manage the following groups: Network, Browser, Video/Audio, TAS, and System Services. Click Management > System services. The screen shown below appears.

1In the Network Media Player (port 6666) field, select Yes to access the NMP-500 using a Telnet client on port 6666. If you do not want this, select No.

2In the MIB Event Notification field, select Yes to be notified of changes that you made to the NMP-500settings.

3If any changes were made to this screen, do the following:

•To enable the changes, click Apply

•To save the changes, click the Administration menu > click Save Configuration > click Save.

ViewSonic NMP-500

16 of 38

Image 20

Contents Page Product Registration Contents Actions Packaged Contents IntroductionRequirements System RequirementsFeatures TWO Modes of CommunicationTWO Modes of Operation StandaloneBack View Remote ControlFront View Setup Manually Configure Your PCLogin Connect the NMP-500TO a DisplayDVI Put Batteries in Remote Control Startup URLS/NETWORK Configuration ManagementBrowser Configuration ViewSonic NMP-500 VNC Client VIDEO/AUDIO Configuration TAS Configuration System Services Configuration Actions Video MulticastVideo Http Playlist To create a playlistVNC Client Transparency GO to URL Administration Advanced Video ConfigurationSecurity Save Configuration Default SettingsReboot Firmware UpgradeHelp StatusLicense AboutCompliance and Safety Notices AppendixCanadian compliance notice For EU-member states only as follows Screens Actions Administration Help Customer Support = FAXSpecifications CvbxLimited Warranty ViewSonic Limited Warranty Terms and ConditionsLimitation of Implied Warranties