ViewSonic NMP-500 manual Security

Page 28

SECURITY

To change the User name and Password of the NMP-500, click Administration > Security. Current settings automatically appear in each field as shown below: default User name/ Password is admin/admin.

1In the Password field, type a new password.

2In the Repeat Password field, re-type the new password.

3If any changes were made to this screen, do the following:

•To enable the changes, click Apply

•To save the changes, click the Administration menu > click Save Configuration > click Save.

ViewSonic NMP-500

24 of 38

Image 28

Contents Page Product Registration Contents Actions Packaged Contents IntroductionRequirements System RequirementsFeatures TWO Modes of CommunicationTWO Modes of Operation StandaloneFront View Remote ControlBack View Setup Manually Configure Your PCLogin Connect the NMP-500TO a DisplayDVI Put Batteries in Remote Control Startup URLS/NETWORK Configuration ManagementBrowser Configuration ViewSonic NMP-500 VNC Client VIDEO/AUDIO Configuration TAS Configuration System Services Configuration Actions Video MulticastVideo Http Playlist To create a playlistVNC Client Transparency GO to URL Administration Advanced Video ConfigurationSecurity Save Configuration Default SettingsReboot Firmware UpgradeHelp StatusLicense AboutCompliance and Safety Notices AppendixCanadian compliance notice For EU-member states only as follows Screens Actions Administration Help Customer Support = FAXSpecifications CvbxLimited Warranty ViewSonic Limited Warranty Terms and ConditionsLimitation of Implied Warranties