ViewSonic NMP-500 manual TAS Configuration

Page 19

TAS CONFIGURATION

This screen works in conjunction with TAS. (TAS software can be purchased through Tivella at www.tivella.com or through an authorized Tivella dealer/reseller.) Click Management > TAS. The screen shown below appears.

1In the Timeout (sec) field, type the number of seconds for the NMP-500sto access TAS.

2In the IP Address field is a valid DNS name automatically generated by TAS when connected to a network but empty when used as a standalone.

3If any changes were made to this screen, do the following:

•To enable the changes, click Apply

•To save the changes, click the Administration menu > click Save Configuration > click Save.

NOTE: FTP server is only for Network Displays with local storage.

ViewSonic NMP-500

15 of 38

Image 19

Contents Page Product Registration Contents Actions Introduction Packaged ContentsSystem Requirements RequirementsTWO Modes of Communication FeaturesStandalone TWO Modes of OperationFront View Remote ControlBack View Manually Configure Your PC SetupConnect the NMP-500TO a Display LoginDVI Put Batteries in Remote Control Management Startup URLS/NETWORK ConfigurationBrowser Configuration ViewSonic NMP-500 VNC Client VIDEO/AUDIO Configuration TAS Configuration System Services Configuration Video Multicast ActionsVideo Http To create a playlist PlaylistVNC Client Transparency GO to URL Advanced Video Configuration AdministrationSecurity Default Settings Save ConfigurationFirmware Upgrade RebootStatus HelpAbout LicenseAppendix Compliance and Safety NoticesCanadian compliance notice For EU-member states only as follows Screens Actions Administration Help = FAX Customer SupportCvbx SpecificationsViewSonic Limited Warranty Terms and Conditions Limited WarrantyLimitation of Implied Warranties