ViewSonic NMP-500 manual VIDEO/AUDIO Configuration

VIDEO/AUDIO CONFIGURATION

This screen is used to adjust the display and audio parameters. Click Management > Video/ Audio. The screen shown below appears.

1In the TV Mode field, click the down arrow for the pull-down menu and select one of the options.

2Move the Brightness slider: values range between -128 and 127

3Move the Contrast slider: values range between 0 and 255

4Move the Saturation slider: values range between 0 and 255

5Move the Audio Channel Volume (left) slider: values range between 0 and 100

6Move the Audio Channel Volume (right) slider: values range between 0 and 100

7If any changes were made to this screen, do the following:

•To enable the changes, click Apply

•To save the changes, click the Administration menu > click Save Configuration > click Save.

ViewSonic NMP-500 14 of 38