ViewSonic NMP-500 manual Transparency

Page 25

TRANSPARENCY

To change the transparency of the browser on-screen in relation to the video image in the background, click Actions > Transparency. The screen shown below appears.

1In the Transparency between OSD and video layer field, type a number between 0 to 255 for a more or less transparent (translucent) browser image (user interface) so you can still see through the browser OSD (On-Screen Display) shown below on the right with your video or other images: 0 = no OSD, 255 = no video, 128 = equal transparency between video and OSD layers.

OSD not transparent

OSD very transparent

2 To apply the entered transparency value to the image on the NMP-500, click Apply.

ViewSonic NMP-500

21 of 38

Image 25
Contents Page Product Registration Contents Actions Introduction Packaged ContentsSystem Requirements RequirementsTWO Modes of Communication FeaturesStandalone TWO Modes of OperationFront View Remote ControlBack View Manually Configure Your PC SetupConnect the NMP-500TO a Display LoginDVI Put Batteries in Remote Control Management Startup URLS/NETWORK ConfigurationBrowser Configuration ViewSonic NMP-500 VNC Client VIDEO/AUDIO Configuration TAS Configuration System Services Configuration Video Multicast ActionsVideo Http To create a playlist PlaylistVNC Client Transparency GO to URL Advanced Video Configuration AdministrationSecurity Default Settings Save ConfigurationFirmware Upgrade RebootStatus HelpAbout LicenseAppendix Compliance and Safety NoticesCanadian compliance notice For EU-member states only as follows Screens Actions Administration Help = FAX Customer SupportCvbx SpecificationsViewSonic Limited Warranty Terms and Conditions Limited WarrantyLimitation of Implied Warranties