Guide to features rear panel | Tivoli Audio Model Three manual

Guide to features (rear panel):

English

input and switch the Stereo/Mono switch to Stereo. Connecting a speaker other than the Tivoli Audio

Model Three companion speaker will void your

warranty and possibly damage your unit.

1.BALANCE: With the companion speaker (sold separately) connected, set the Mono/Stereo switch to Stereo. Turn the balance knob upward to hear the left (main unit) speaker, or downward to hear the right (companion) speaker. The center detent provides equal balance between the two speakers.

2 R SPR: Connect the male RCAcable from the right companion speaker (sold separately) to this

3.12-16VDC:Connect the included AC power supply to this input or use an optional DC

power supply. Do not plug the Model Three into an outlet controlled by a wall switch. Should the Model Three power supply ever be misplaced or damaged, use only a like replacement.The connector is 5.5mm/2.1mm center positive.

4. ANTENNASWITCH: Switch between inter-
nal and external FM antennae. If the included
FM antenna is used, set this switch to external.	2	3	7 6
This switch has no affect on AM reception.

Tivoli Audio

5.EXTERNAL FM CONNECTION: The Model Three has built-in AM and FM antennae. To improve FM reception, insert the end of the supplied FM antenna into the center of this “F” connector and set the switch to External. Adjust the wire for best reception. See the section marked “Reception” for more information. This connection has no affect on AM reception.

6.HEADPHONE: Connect a headset (not included) to this stereo output for private listening. The headphone volume is controlled by the Model Three’s volume knob. Connecting a pair of headphones will mute the Model Three’s speaker. This jack accepts a 1/8" stereo male mini plug.

7.SUB OUT: Connect Tivoli Audio’s Model Subwoofer (sold separately) to this output to enhance the bass. This jack accepts a 1/8" stereo male mini plug.

8.AUX IN: To hear audio from another device , such as Tivoli Audio’s Model CD, connect the device’s audio output to this stereo input and switch the source knob to Aux. Note that you may need to adjust the volume level differently for an auxiliary device than the level normally used for radio listening. This jack accepts a 1/8" stereo male mini plug.

9.REC OUT: You may record from the Model Three by connecting a cassette deck or other recording device to this ﬁxed level, stereo output. You may also use the Model Three as a high-performance AM/FM analog tuner by connecting a preampliﬁer or integrated ampliﬁer to this output. The Model Three’s speaker will not be muted when using this output. This jack accepts a 1/8" stereo male mini plug.

10.MIX IN: Connect your computer’s (or other device) audio output to this stereo input to hear audio mixed-in with either the tuner or auxiliary device if one is connected. The volume level of this input must be adjusted at the source. This jack accepts a 1/8" stereo male mini plug.

11.MONO/STEREO: This switch should remain in the Mono position unless the right companion speaker (sold separately) is connected, in which case the Stereo position should be selected. If you are using the companion speaker and have the switch set to Stereo, you may wish to experiment with