Teac GF-350 Remote Control Unit, About CD-R and CD-RW discs, Finalizing, Battery Installation

Page 7

About CD-R and CD-RW discs

CD-R discs can be recorded once only. Once they have been used for recording, they cannot be erased or re-recorded. However, if space is available on the disc (and the disc has not been finalized), additional material can be recorded.

By contrast, a CD-RW disc can be used in much the same way as a CD-R disc, but the last track or tracks recorded can be erased, and the space on the disc can be re- used for other recordings.

However, you should note that an audio CD created using a CD-RW disc may not play back satisfactorily on every audio CD player.

CD-R, by contrast, may be played satisfactorily on the majority of audio CD players.

Finalizing

Although audio data may be written on a CD-R or CD-RW disc, a standard CD player will not be able to play back the audio until a final table of contents (TOC) has been written at the start of the disc.

The process of writing this table of contents is known as “finalizing”. Once this has been done, no further data can be written to the disk.

Note that a CD-RW disc that has been finalized can be “unfinalized”. This allows further tracks to be recorded to the disc, provided that there is space on the disc.

<Repeat, shuffle and programmed playback don’t work with unfinalized (NO TOC) discs.

Recordable discs

In this manual, we use the term “recordable” disc to describe a CD-R or CD-RW disc that has not been finalized, and has enough space to record.

Remote Control Unit

The provided Remote Control Unit allows the unit to be operated from a distance.

When operating the remote control unit, point it towards the REMOTE SENSOR on the front panel of the unit.

<Even if the remote control unit is operated within the effective range, remote control operation may be impossible if there are any obstacles between the unit and the remote control.

<If the remote control unit is operated near other appliances which generate infrared rays, or if other remote control devices using infrared rays are used near the unit, it may operate incorrectly. Conversely, the other appliances may operate incorrectly.

Battery Installation

1Remove the battery compartment cover.

2Insert two “AA” (R6, SUM-3) dry batteries. Make sure that the batteries are inserted with their positive “+” and negative “_” poles positioned correctly.

3Close the cover.

Battery Replacement

If the distance required between the remote control unit and main unit decreases, the batteries are exhausted. In this case replace the batteries with new ones.

Precautions concerning batteries

<Be sure to insert the batteries with correct positive “+” and negative “_” polarities.

<Use batteries of the same type. Never use different types of batteries together.

<Rechargeable and non-rechargeable batteries can be used. Refer to the precautions on their labels.

<When the remote control unit is not to be used for a long time (more than a month), remove the batteries from the remote control unit to prevent them from leaking. If they leak, wipe away the liquid inside the battery compartment and replace the batteries with new ones.

<Do not heat or disassemble batteries and never dispose of old batteries by throwing them in a fire.

ENGLISH

7

Image 7
Contents 9A10219000 GF-350Important Safety Instructions Type SF-W36FR Manufacturer Laser output For U.S.ABefore using the unit ContentsRemoving old stylus How to Replace the StylusInstalling a new stylus Handling RecordsCD-RCD-RW DiscsFinalizing Remote Control UnitBattery Installation About CD-R and CD-RW discsFM antenna AC Power CordPlug this AC power cord into an AC wall socket ConnectionsParts of the Turntable How to open/close the turntable coverP O N M L K J Unit Functions and Remote ControlPHONO/AUX, FM/AM, CD PowerVolume TuningAM broadcast Basic OperationListening to the Radio If the reception is poorGently open the dust cover Listening to a RecordPress the PHONO/AUX button once or twice to select PhonoGently lower the tone arm by slowly releasing the cue lever Turntable will begin to turnNo TOC CD-R Listening to a CDCD-R CD-RWTo skip to the next or a previous track To suspend playback temporarily pause modeTime Display To stop playbackRepeat 1 Repeat one track Repeat PlaybackShuffle Playback Repeat ALL Repeat All the TracksPress the Program button Press the Program button in the stop modeProgrammed Playback Press the Music Skip button . or / to select a trackBefore Recording 20db, -30db or -40db Auto REC RecordingLoad a recordable CD-R or CD-RW disc into the unit ManualPress the Stop button H to stop recording To suspend recording temporarily pause modeTo stop recording Manual track divisionFinalize Press the Play button y to start erasing or unfinalizing Erase or Unfinalize a CD-RWEr and the number of the last track recorded on the disc Er ALLTroubleshooting Error Messages SpecificationsMessages NE PAS Déplacer L’APPAREIL Durant LA Lecture SommaireAvant l’utilisation AvertissementAvertissement Installation d’une nouvelle aiguilleManutention des disques Comment remlacer l’aiguilleDisques Mise en place des piles Boîtier de télécommandeRemarques concernant les disques compacts CD-R et CD-RW FinalisationPrécaution RaccordementsAntenne FM Cordon d’alimentationComment ouvrir/fermer le couvercle de la platine Nomenclatures des controles table tournanteNomenclatures des controles Affichage Indicateur Tuned Capteur de télécommandeEnceintes stéréo Touches de commande de CD Stop H Panneau d’affichage fréquenceTransmission AM Opération de baseÉcoute de la radio Si la réception est mauvaiseAttache Écoute de disque3visse Adapteur 45 RPM Déposez le disque sur la table tournanteLa table tournante commence à tourner Aucune mention Écoute de CDAppuyez sur la touche CD pour choisir CD Appuyez sur la touche OPEN/CLOSE L pour fermer le tiroirPour sauter au morceau suivant ou précédant Pour suspendre la lecture momentanément mode pauseAffichage du temps Pour arrêter la lectureRepeat 1 Répétition du morceau Lecture répétéeLecture aléatoire Repeat ALL Répétition de tout le disquePour supprimer le dernier morceau du programme Lecture ProgramméePour contrôler l’ordre programmé Pour ajouter un morceau à la fin du programmeScms Système de gestion de copie en série Avant d’enregistrerRègle Appuyer sur la touche Record EnregistrementPour enregistrer à partir d’un disque vinyle, sélectionner 20db, -30db ou -40db Auto RECPour arrêter l’enregistrement, appuyer sur la touche Stop H Pour interrompre l’enregistrement temporairement mode pausePour arrêter l’enregistrement Division manuelle de morceauFinalisation Appuyez sur la touche Finalize en mode arrêtCette section concerne ce qui suit l’enregistrement Er et le numéro du dernier morceau enregistré sur le disque Effacement ou dé-finalisation d’un CD-RWErALL Dépannage Affichage des erreurs SpécificationsGénéralités Model number Serial number Teac Corporation