ENGLISH
STARTING THE AIR CONDITIONER cont.
FILTER RESET
This feature automatically notifies you that the air filter must be cleaned. The indicator light will come on after 240 hours of operation. Clean the air filter (refer to Care and Cleaning), place it back in the front panel, and press the Filter Reset button. The light will turn off.
USING THE REMOTE CONTROL
NOTE: The raised dots are Braille for the visually impaired. (See Fig.23)
Remote control may differ in appearance from the image shown.
NOTE: Remove and discard protective film prior to use. The remote control runs on one CR2025 battery (included). Replace battery after 6 months of use, or when the remote control starts to lose power. To change battery, first remove screw on back panel of remote.
POWER
Press ON/OFF to turn on the air conditioner.
Mode
Press MODE to choose Fan, Cool, Energy Save or Dehum.
Speed | Fig. 23 |
|
Press SPEED to choose High, Med, Low or Auto Cool.
TIMER
ON/OFF
MODE
SPEED
TIMER
TEMP/TIME
TEMP/TIME
To set the air conditioner to turn off after a set amount between 1 hour and 24 hours (unit must be ON):
1.Press TIMER. Timer OFF indicator light on the air conditioner control panel will flash.
2.Press the TEMP/TIME up or down arrow button to change the delay time from 1 hour to 24 hours.
3.After 5 seconds, Timer OFF indicator light on the air conditioner control panel will remain on.
TO SET TIMER TO TURN ON THE AIR CONDITIONER, KEEPING PREVIOUS SETTINGS:
1.Turn on the air conditioner.
2.Press TIMER. Timer On indicator light on the air conditioner control panel will flash
3.Press the TEMP/TIME up or down arrow button to change the delay time from 1 hour to 24 hours.
4.After 5 seconds, Timer On indicator light on the air conditioner control panel will remain on.
PAGE 18 | USING YOUR AIR CONDITIONER |