Operation
AUTO RUN, COOL,HEAT and DRY operation
Recommendations | Use COOL in summer. |
| Use HEAT in winter. |
| Use DRY in spring,autumn and in damp climate. |
(1) Unit start
Press ON/OFF button, unit starts.
Previous operation status appears on display (Not Timer setting). Power indicator lights up.
HEALTH
HEAT 
(4) Fan speed selection
Press FAN button. For each press, fan speed changes as follows:
AUTO
(2) Select operation mode
Press MODE button. For each press, operation mode changes as follows:
AUTO COOL DRY HEAT FAN
Unit will run in operation mode displayed on LCD. Stop display at your desired mode.
(3) Select temp. setting
Press TEMP button
LOW MID HIGH AUTO
(5) Unit stop
Press ON/OFF button.
Only time and room temp remains on LCD. All indicators go out.
Vertical flap closes automatically.
Unit will start running to reach the temp. setting on LCD.
Hints
Wire controller can memorize each operation status. When starting it next time, just press ON/OFF button and unit will run in previous status.
10