Haier HDU-18HF03, HDU-18CF03 Rated Maximum Minimum Indoor, Cooling, Outdoor, Heating Indoor

Page 6

Safety Precautions

The machine is adaptive in following situation

1. Applicable ambient temperature range:

 

 

 

Rated

Maximum

Minimum

 

Indoor

DB C

27

32

18

Cooling

WB C

19

23

14

 

outdoor

DB C

35

43

10

 

 

WB C

24

26

6

 

 

Heating

Indoor

DB C

20

27

15

WB C

14.5

--

--

 

 

 

outdoor

DB C

7

24

-7

 

WB C

6

18

--

 

 

2.If the supply cord is damaged, it must be replaced by the manufacturer or its service agent or a similar qualified person.

3.If the fuse on PC board is broken please change it with the type of T 3.15A /250V.

4.The wiring method should be in line with the local wiring standard.

5.The power cable and connecting cable are self-provided. The power cable should be H07RN-F 3G 2.5mm2 ( For HDU-18CF03, HDU-18HF03), H07RN-F 3G 4.0mm2 ( For HDU-28CF03,HDU-28HF03).The connecting cable should be H05RN-F 0.75mm2x2+2.0mm2x3 (For HDU-18HF03), H05RN-F 2.0mm2x3 ( For HDU-18CF03), and H05RN-F : 0.75mm2x6 (For HDU-28HF03); H05RN-F 0.75mm2x4 ( For HDU-28CF03). During installation, when the

connecting cables break off, it must be assured that the grouding wire is the last one to be broken off.

6.The breaker of the air conditioner should be all-pole switch; and the distance between its two contacts should be no less 3mm.

7.The indoor unit installation height is at least 2.5m.

5

Image 6
Contents Duct Type AIR Conditioner Table of Contents Disposal of the old air conditioner Safety Precautions Make sure the system is groundedDo not wash the air conditioner with water Outdoor Rated Maximum Minimum IndoorCooling Heating IndoorParts and Functions Power ON/OFF Parts and Functions OperationCool Fan operation Auto RUN, COOL,HEAT and DRY operation 3Timer setting 1After unit start, select your desired operation mode2TIMER mode selection 4Confirming your settingTime confirming for Timer on Press Timer button to change Timer mode3Time setting for Timer on 5Time setting for Timer OFFCooling, dehumidifying mode Heating mode This series changeover switch is set 1. on 2.OFF 3.OFF 4.OFF Malfunction Unit fails to startMalfunction Followings are not malfunction Care and Malntenance Points to observeWhen heating is started For Preparation of HeatingHot KeepIs The Unit Installed Correctly Installation placeInstallation Manual For Wire Controller Install wire controllerIndoor unit wiring Installation Manual For Indoor Unit Safety precautionsIndoor unit Installation Manual For Indoor Unit Sketch map of long duct Installation of air sending duct Installation of air return ductThermal insulation of duct Foundation bolt Requirements Pipe and insulation materialHose Allowable pipe length and drop Pipe material and size Supplementary refrigerantConnection of refrigerant pipe Vacuum pumping Open all valvesGas leakage detection Electric wiring Haier Group