Bose SOUNDDOCKPORT, SoundDock Portable manual Technical Information, System size and weight

English

Dansk Deutsch Español Français Italiano Nederlands Svenska

OTHER CARE AND HANDLING

Problem	What to do
The dock does not open	• Use a soft, dry cloth to wipe the outside of the dock, whether it is open or closed.
or close properly	• Blow around the edges of the dock to remove any dirt or debris from the crevices.
No sound	• Increase the volume setting for the system.
	• Make sure the SoundDock® battery is charged or the system is plugged in, your iPod® is turned on, and
	a music track is selected and playing.
	• Remove your iPod from the dock, wait 5 seconds, then reseat it. You may need to do this a few times.
	• With another sound device, be sure your iPod is removed from the dock and the second device is
	properly connected, turned on and set to play.
	• If the other sound device is connected and playing, press any button on the remote control to activate
	the system. Review “Playing another sound device” on page 8.
	• Unplug the SoundDock Portable system and remove the battery from the back of the system to com-
	pletely shut off any power to it. Then reattach the battery and plug the system in again.
No sound and your iPod	• Make sure your iPod is firmly seated in the dock and the SoundDock Portable system battery is charged
is not charging	or the power supply is plugged in properly.
	• Remove your iPod from the dock, wait 5 seconds, and return it to the dock.
	• An iPod that has buttons and no click-wheel control does not recharge while it plays and may need
	recharging.
	• If the power supply is in use, make sure the power outlet is functioning properly.
	• Unplug the SoundDock Portable system and remove the battery from the back of the system to com-
	pletely shut off any power to it. Then reattach the battery and plug the system in again.
Your iPod does	• Remove your iPod from the dock, wait 5 seconds, then reseat it. You may need to do this a few times.
not respond to the	• Your iPod software may need to be updated.
SoundDock remote	• Try the remote from a different location. If it works there, strong lighting or other conditions may be
control
	causing the problem. Refer to “Using the remote” on page 7 for further details.
	• Make sure nothing blocks the infrared (IR) signal path from the remote to your SoundDock Portable
	system. Wipe off the small lens on the front end of the remote.
	• Check the remote control battery to make sure the + side is up, as shown on page 10.
	• Replace the remote control battery.
	• Unplug the SoundDock Portable system and remove the battery from the back of the system to com-
	pletely shut off any power to it. Then reattach the battery and plug the system in again.

Technical Information

Power supply rating

Input: 100-240V 50-60Hz, 1A

Output: 20V, 2A

System size and weight

6.7"H x 12.0"W x 5.1”D (17.0 cm x 30.7 cm x 12.8 cm) 5.2 lb (2.4 kg), including battery

11