TAB 8, 16 | TAB 7, 15 | TAB 6, 14 | TAB 5, 13 | TAB 4, 12 | TAB 3, 11 | TAB 2, 10 |
SYSTEM SETUP
English
Activating the system
Initially, the battery is not fully charged and may be in a protection or inactive mode.
To activate your new system and charge the battery:
1.Place the SoundLink™ speaker on a flat, stable surface.
2.Attach the AC adapter for your region (more than one may be included) to the power supply.
Your system includes one of these two
types of power supplies.
AC adapter
IMPORTANT IN CHINA AND KOREA ONLY:
An AC adapter for use in your country is labeled on the outside of the small bag that contains it. Be sure to use that adapter only.
3.Plug the DC power cord on the power supply into the DC POWER connector on the SoundLink speaker.
Power supply
DC
POWER
DC power cord
4.Plug the power supply into a live AC outlet.
CAUTION: Use this system only with the provided power supply or a replacement power supply from Bose Corporation.
Note: To reach full charge, the battery requires charging for a minimum of 10 hours. See “Charging the battery” on page 9.
2