English
TAB 2, 10 | TAB 3, 11 | TAB 4, 12 | TAB 5, 13 | TAB 6, 14 | TAB 7, 15 | TAB 8, 16 |
CARE AND MAINTENANCE
4.Plug the battery into the
5.Push in the slotted knob and turn it clockwise until the slot is vertical.
6.Connect the power supply and charge the battery.
Replacing the remote battery
When the remote stops operating or its range seems reduced, it is time to change the remote battery. Replace it with type CR2032 or DL2032.
1. Using a coin, turn the battery cover slightly counterclockwise.
2. Remove the used battery and insert the new one. Be sure the battery is plus (+) side up.
3. Reseat the cover and turn it clockwise until it locks into place.
WARNINGS:
•Keep the remote control battery away from children. It may cause a fire or chemical burn if mishandled. Do not recharge, disassemble, heat above 100ºC (212ºF), or incinerate.
•Dispose of used batteries promptly. Replace only with a battery of the correct type and model number.
•Danger of explosion if battery is incorrectly replaced. Replace only with Duracell, Eveready, Energizer, Maxell, Toshiba, or Shun Wo CR2032 or DL2032
Cleaning
To clean the exterior surface of your product, you can wipe it using a soft, dry cloth. You can also lightly vacuum the grille.
•Do not use solvents, chemicals, or sprays.
•Do not allow liquids to spill or objects to drop into any openings.
Troubleshooting
If you experience difficulty with your SoundLink™ wireless music system, use the following table to try to solve the problem. If the problem persists, see “Contacting customer service” on page 14.
11