PREPARATION |
| – Power – |
|
| ||||
Connecting to the AC adapter |
|
|
| |||||
Connect the provided AC adapter to the main unit. |
|
| ||||||
|
|
|
|
|
| Screw | Provided AC adapter |
|
DV IN/OUT |
|
|
|
|
| Clamp | AC | |
AUDIO |
| VIDEO |
|
|
|
| ||
LINE | Y/C |
|
|
|
| |||
CH 1/3 CH 2/4 |
|
|
|
|
|
| ||
|
|
| IN |
|
|
|
|
|
|
|
|
| REMOTE | DC12V |
|
| Provided power |
|
|
| OUT |
| NTSC/PAL |
|
| cord |
|
|
|
|
|
|
| ||
|
|
|
|
|
|
|
| |
|
|
| 9PIN |
| SERIAL NTSC PAL |
|
|
|
|
|
| DC IN terminal | DC cord |
| |||
|
|
|
|
|
| |||
Switching on the power |
| ||
OPERATE indicator |
|
| |
OPERATE |
|
|
|
Mini | A.DUB | REC | PLA |
|
| DVCAM NTSC PAL REC INH. |
|
PROFESSIONAL |
|
| |
|
|
| |
MIC REMOTE SEL. | INPUT SEL. | REW | STO |
SERIAL | LINE |
| |
9PIN WIRELESS | DV Y/C |
|
|
OPERATE button |
|
| |
When the unit is in the OPERATE OFF mode (the OPERATE indicator lights up red), press the OPERATE button on the unit or the remote controller.
• The power is turned on and the OPERATE in- dicator lights up green. The unit is now ready for operation. (OPERATE ON mode)
Memo • Once a cassette has been loaded in the OP- ERATE OFF mode, power will be turned on and the OPERATE ON mode will be engaged.
OPERATE indicator |
OPERATE |
| Mini | A.DUB |
|
|
|
| DVCAM NTSC PAL REC INH. |
PROFESSIONAL |
| ||
|
|
| |
MIC | REMOTE SEL. | INPUT SEL. | |
| SERIAL | LINE | |
| 9PIN WIRELESS | DV Y/C |
|
OPERATE button
Memo
1. | Connect the DC cord of the AC adapter |
| to the DC IN terminal of the main unit. |
2. | To prevent accidental disconnection of |
| the DC cord, fasten the DC cord with a |
| clamp. |
| 1Remove 1 screw followed by the clamp. |
| 2Insert the DC cord into the clamp and fasten |
| the clamp unto the main unit. |
3. | Connect the provided power cord to the |
| AC IN terminal of the AC adapter. |
4. | Connect the power cord to the power |
DISPLAY |
|
|
BARS | STILL | BLANK |
MODE | ||
|
| AUDIO |
MENU | SEARCH+ | MUTING |
|
| OUT SEL. |
| SET |
|
| SEARCH– | OUT LEV. |
A.DUB | PAUSE | REC |
F.REV |
| F.ADV |
| PLAY | |
REW |
| FF |
| STOP | |
INDEX– |
| INDEX+ |
REMOTE CONTROL UNIT
• The remote controller is only effective when the REMOTE SEL. switch is set to WIRELESS.
•Even in the OPERATE OFF mode, a small amount of electricity will still flow into the unit.
•When the unit is in the OPERATE OFF mode, no operation can be performed ex- cept that of the OPERATE buttons(on the main unit and the remote controller) and cassette loading/ejecting.
Notes
socket. | |
• | Power is channeled into the unit and the OP- |
| ERATE indicator lights up red (OPERATE |
| OFF mode). |
• | If the DC IN MODE item of the SYSTEM (2/ |
| 2) menu is set to OPE ON or PLAY, the OP- |
| ERATE indicator will light up green (OPER- |
| ATE ON mode). If it is set to PLAY, the VTR |
| will automatically start to play the loaded tape. |
Turning off the power
Stop all operational activities of the | |
| unit. |
1. | Press the OPERATE button on the unit |
| or the remote controller. |
| • The unit will enter the OPERATE OFF mode |
LOW VOLTAGE
•Please supply power to the unit via the provided AC adapter. Do not use other power sources.
•During recording or playback, please do not unplug the DC or power cord.
•When the supply voltage is low, the “LOW VOLTAGE” alarm mes-
sage will be displayed. ☞ Page 66
| and the OPERATE indicator will light up red. |
2. | If the unit is not to be used for a long |
| period of time, please unplug the AC |
| adapter. |
| • To disconnect the AC adapter, please unplug |
| the power cord from the socket first. |
Alarm message
26
27