JVC BR-DV3000U instruction manual
Display 1/2 menu

MENU SCREEN		– Contents of the menus –		(continued)
TIME CODE menu
Items	Setting		Contents
TC		Presets the time code.
		For details, please refer to Page 36 "Presetting Time Codes".
CLEAR	 CANCEL	Use this menu item to choose whether to clear the time code values.
	EXECUTE	CANCEL	: Do not clear
		EXECUTE	: clear

DISPLAY menu

The DISPLAY menu consists of 2 menus (1/2 and 2/2 menu)

DISPLAY (1/2) menu

Items	Setting	Contents
DISPLAY	OFF	Use this menu item to choose whether to have the characters of
	 ON	the status screen displayed on the monitor connected to VIDEO
	AUTO	LINE OUT or Y/C OUT terminal.

NDF/DF (NTSC ONLY)

NDF	Select the framing mode for the time code generator.
 DF	NDF	: Sets the unit to the non-drop mode. Use this setting when
	DF	the number of frames of the time code is important.
		: Sets the unit to the drop-frame mode. Use this setting for
		real-time based time codes.

OFF	: No on-screen display. Video display only.
ON	: Always provide on-screen display.
AUTO	: Provide on-screen display for about 4 seconds on switch-
	ing modes.
Memo
This setting can also be selected from the DISPLAY button of the

TC DUPLICATE

OFF AUTO NON DROP

Use this menu item to select the type of time code to be recorded
for DV signal input.
OFF	: Records the time codes of the built-in time code
AUTO	generator of the main unit.
	: Records the time code input to the DV IN terminal.
	The framing mode of the time code will be auto-
NON DROP	matically set to the framing of the input time code.
	: Records the time code input to the DV IN terminal.
	The framing mode of the time code will be fixed as
	non-drop framing. Use this setting when dubbing
	on tapes recorded with BR-DV600, GY-DV500, GY-
	DV550, or GY-DV700W in the non-drop frame mode.
	(NTSC only)

		wireless remote controller.
COUNTER POSI.	 LOWER-R	Use this menu item to select the position on the monitor for time
	LOWER-L	code display.
	UPPER-R	LOWER-R	: Lower right
	UPPER-L	LOWER-L	: Lower left
	CENTER	UPPER-R	: Upper right
		UPPER-L	: Upper left
		CENTER	: Center
TIME CODE	OFF	Use this menu item to turn on/off the display of time codes on the
	 ON	monitor.

TC ADJUST (DV)	 OFF	Use this menu item to set the timing to output time codes from the
	+1F	9PIN REMOTE terminal of the main unit to the editing remote con-
	+2F	troller.
	–2F	OFF	: Usually, this is selected.
	–1F	+1F	: Sets the timing to 1 frame faster.
		+2F	: Sets the timing to 2 frames faster.
		–2F	: Sets the timing to 2 frames slower. Use this setting when
		–1F	editing video or audio using DV signals.
			: Sets the timing to 1 frame slower.
PAGE BACK		Return to the TOP MENU.

		OFF	: No display
		ON	: Display
VTR MODE	OFF	Use this menu item to turn on/off the display of the VTR mode on
	 ON	the monitor.
		OFF	: No display
		ON	: Display
TAPE REMAIN	OFF	Use this menu item to turn on/off the display of remaining tape on
	 ON	the monitor.
		OFF	: No display
		ON	: Display
TIME/DATE	OFF	Use this menu item to turn on/off the date/time display on the moni-
	TIME	tor and to select the display format.
	DATE	OFF	: No display of date/time.
	 DATE +TM	TIME	: Display the time only.
		DATE	: Display the date only.
		DATE +TM : Display the date/time.

62

63