PLAYBACK | – Repeat playback – |
PLAYBACK | – Selecting playback audio output – |
This unit is capable of 3 types of repeat playback. |
The repeat playback function is set via the REPEAT MODE item of the SYSTEM (1/2) menu. |
The output mode for
audio playback can be selected with the remote controller.
SYSTEM (1/2) menu | ||||||
| – – – S Y S T E M [ 1 | / 2 | ] – – – |
| ||
S T L / | F . | A D V |
|
| 2 N D |
|
B A C K U P | R E C | T I M E |
| O F F |
| |
L O N G | P A U S E | T I M E |
| 5 M I | N | |
L O N G | P A U S E | M O D E |
| F . A D V | ||
Setting
⬛REPEAT MODE item of the SYSTEM (1/2) menu
DISPLAY
STILL
BARS MODE BLANK
⬛To turn the audio muting function ON/ OFF or to mute the EE audio, press the AUDIO MUTING button.
To resume the audio output, press the button again.
I N D E X | W R I | T E | O N |
R E P E A T M O D E | B L A N K | ||
N E X T | P A G E |
|
|
P A G E | B A C K |
|
|
OFF | :No repeat playback |
INDEX | :Repeat playback between positions where index sig- |
| nals are recorded. |
VIDEO END :Repeat playback from the beginning of the tape to | |
TAPE END | the position where video signal recording ends. |
:Repeat playback from the beginning to the end of | |
| the tape. |
|
| AUDIO |
MENU | SEARCH+ | MUTING |
|
| OUT SEL. |
| SET |
|
| SEARCH– | OUT LEV. |
A.DUB | PAUSE | REC |
F.REV | PLAY | F.ADV |
|
|
AUDIO MUTING button
OUT SEL button
OUT LEV button
⬛Selecting the audio output channel for playback of tapes recorded in the 32kHz mode.
Each time the OUT SEL. button is pressed, the channel changes in the following sequence:
CH1/CH2 |
| CH3/CH4 |
| MIX |
|
|
INDEX repeat playback
•If no index signal is de- tected during playback, the tape will run till the end. If no index signal is detected during rewind, the tape will rewind till the beginning.
•If the interval between in- dex signals is less than 1 minute, the function may not work well.
Memo
If there is dust adhered to the head, repeat playback may not work well.
Operation |
|
|
| ||
1. | Press the REW button and rewind the tape to the be- | ||||
| ginning. |
|
|
| |
2. | Press the PLAY button to begin replay. | ||||
| ¥ When it reaches the position set at the REPEAT MODE menu | ||||
| item, the tape rewinds and plays back again. | ||||
⬛ To abort the repeat playback function, press the STOP | |||||
button. |
|
|
| ||
| Repeat operation |
|
|
| |
|
| TAPE END |
|
|
|
|
| VIDEO END |
|
|
|
|
| INDEX |
|
|
|
|
| Playback |
|
|
|
|
| Rewind |
|
|
|
|
| Index signal | Index signal | ||
|
|
|
|
|
|
REW | FF |
| STOP |
INDEX– | INDEX+ |
REMOTE CONTROL UNIT
Memo
•The output channel for playback audio of tapes recorded in the 32kHz mode can also be set via the AUDIO OUT SEL item of the AUDIO/ VIDEO menu of the main unit.
•The audio output level can be set via the AU- DIO OUT LEVEL item of the AUDIO/VIDEO menu.
☞ Page 61 “AUDIO/VIDEO menu”
•CH3/CH4: CH3 audio is output via the CH1/3 AUDIO OUT terminal whereas CH4 audio is output via the CH2/4 AUDIO OUT terminal.
•MIX: Sounds mixed from CH1 and CH3 are output via the CH1/3 AUDIO OUT terminal whereas Sounds mixed from CH2 and CH4 are output via the CH2/4 AUDIO OUT terminal.
Note
Depending on the sound source, noise may oc- cur in the MIX mode. In this case, please use CH1/CH2 or CH3/CH4.
⬛Select the output level for audio play- back
Each time the OUT LEV button is pressed, the standard level for the output audio level changes. (NORMAL or ATT)
•To play back tapes recorded at a standard level of
•To play back tapes recorded on this unit, set
Beginning of tape | End of tape |
the output level to NORMAL.
48 | 49 |