Contents of the menus | JVC BR-DV3000U manual

MENU SCREEN		– Contents of the menus –
In the menu descriptions below, settings with “⬤” marks are factory settings.
TOP MENU
Items	Setting		Contents
SYSTEM		Displays the menus related to the operation system of this unit.
REMOTE		Displays the menus related to the remote controller.
AUDIO/VIDEO		Displays the menus related to the audio and video.
TIME CODE		Displays the menu for setting time codes.
DISPLAY		Displays the menu related to the displays on the monitor connected
		to the VIDEO LINE OUT or Y/C OUT terminal.
CLOCK ADJUST		Displays the menu for setting date/time.
		For information on the setting method, please refer to page 31
		“Setting date/time”.
FACTORY	⬤CANCEL	Sets whether to return the values on the menu to those initially set
SETTING	EXECUTE	at manufacture.
		CANCEL	: Do not use the factory settings
		EXECUTE	: Use the factory settings
DRUM HOUR		Displays the drum usage time.
METER		*The cursor cannot be moved to this item.
EXIT		Return to the usual screen.

SYSTEM Menu The SYSTEM menu consists of the following 2 screens. (1/2 and 2/2 menu)

⬛SYSTEM (1/2) menu

Items	Setting				Contents
STL/F.ADV	FIELD	Use this item to select the still image type during the STILL mode
MODE	1st	or frame advance playback.
	⬤2nd	FIELD		: Displays field image. During frame advance playback,
	FRAME			1st and 2nd field images are displayed alternately.
		1st		: displays the 1st field image.
		2nd		: displays the 2nd field image.
		FRAME		: displays the frame image.
		Memo
		The image type for the STILL mode can also be selected with the
		STILL MODE button on the wireless remote controller.
BACKUP REC	⬤OFF	Set this item according to the recording time of the source tape
TIME	25MIN	during DV signal input backup recording.
	55MIN	OFF		: No backup recording.
	75MIN	25MIN		: Use this setting if the recording time of the source tape
	115MIN			is 30 mins
	175MIN	55MIN		: Use this setting if the recording time of the source tape
	265MIN			is 60 mins
		75MIN		: Use this setting if the recording time of the source tape
				is 80 mins
		115MIN		: Use this setting if the recording time of the source tape
				is 120 mins
		175MIN		: Use this setting if the recording time of the source tape
				is 180 mins
		265MIN		: Use this setting if the recording time of the source tape
				is 270 mins
		☞ Page 40 “Backup recording function”
LONG PAUSE	30SEC	Sets the interval after the lapse of which the tape protection mode
TIME	1MIN	will be engaged during an extended STILL mode, STOP mode or
	2MIN	recording pause. The setting for the STILL mode can be made via
	3MIN	the LONG PAUSE MODE menu item.
	⬤5MIN	30SEC: 30 seconds
		1MIN	: 1 minute		3MIN	: 3 minutes
		2MIN	: 2 minutes		5MIN	: 5 minutes
		Memo
		To prevent damage, please set as short a time interval as possi-
		ble.
LONG PAUSE	⬤F.ADV	Use this menu item to set the action to be done when the unit has
TIME	STBY-OFF	been left in the STILL mode for an extended period of time. In the
		case that the unit had been left in the recording pause or STOP
		mode, the unit will go into the Standby Off mode.
		F.ADV : It advances in the forward direction. On the 6th advance-
		ment, it goes into the STOP state.
		STBY-OFF: Goes into the STOP state.

– Contents of the menus –

REMOTE