JVC BR-DV3000U instruction manual
Remote 2/2 menu, Items Setting

MENU SCREEN		– Contents of the menus – (continued)
REMOTE menu
Items	Setting		Contents
REM STOP SEL	 EE	Use this menu item to set the action to be performed when a
	PB	STANDBY ON command is received via the 9 PIN REMOTE ter-
		minal or DV terminal.
		EE: Sets the unit to the EE mode. (The unit will go into the STOP mode.)
		PB: Sets the unit to the PLAY mode. (The unit will go into the STILL mode.)
PB START	 0F	Use this menu item to adjust the edit timing. When the remote con-
DELAY		troller is used, there will be a slight delay time before edit starts. To
	15F	rectify the time discrepancy, adjust the timing for starting playback.
		0F	: No compensation
		1F to 15F : Delay by the number of frames set by the user. When
			this unit is connected to an editing remote controller
			with no BUMP (synchronization) function, use this set-
			ting to adjust the editing precision.
SYNCHRONI-	OFF	Use this setting to turn on/off the BUMP function when the unit is
ZATION	 ON	connected to an editing remote controller.
		OFF : No synchronization
		ON	: Execute synchronization. The editing precision is enhanced .
			Please set the pre-roll time to at least 7 seconds.
NEXT PAGE		Display the REMOTE (2/2) menu.
PAGE BACK		Return to the TOP MENU.

REMOTE (2/2) menu

Items	Setting			Contents
CONTROLLER	 TYPE1-	When remote control is executed via the RS-422A interface, use
SEL	TYPE7	this menu item to set the type of controller connected.
		TYPE1	: RM-G820
		TYPE2	: RM-G860
		TYPE3	: AG-A850
		TYPE4	: RM-450,PVE-500
		TYPE5 - TYPE7 : not in use
FOOT SW	 OFF	Set this menu item when an external switch (e.g., a footswitch) is
	L EDGE	connected to the SERIAL REMOTE terminal. Before using an ex-
	H EDGE	ternal switch (footswitch), please engage the recording pause or
	L LEVEL	recording mode.
		OFF: Use this setting if the external switch is not used.
		L EDGE		: Recording and recording pause is switched at the
				LOW edge of the external switch signal.
		H EDGE		: Recording and recording pause is switched at the
				HIGH edge of the external switch signal.
		L LEVEL		: Record at the LOW edge and pause recording at the
				HIGH edge of the external switch signal.
PAGE BACK		Return to the REMOTE (1/2) menu.
60

AUDIO/VIDEO menu
Items	Setting
AUDIO MODE	 48k
	32k

A.OUT AT	OFF
SERCH	 ON
AUDIO OUT SEL	 CH1/CH2
	MIX
	CH3/CH4
Memo
When it is set to the MIX
mode, noise may be pro-
duced. If this occurs, please
set it to CH1/CH2 or CH3/
CH4.
AUDIO OUT	ATT
LEVEL	 NORM

SET UP	 OFF
(NTSC only)	ON

PAGE BACK

		Contents
Select the audio sampling frequency for recording.
48k	: Records at 48kHz. It records in the 2-channel stereo mode.
	No audio dubbing.
32k	: Records at 32kHz. It records in the 4-channel mode. To per-
	form audio dubbing on CH3 and CH4 later, use this setting.
Memo
This setting is not required for DV signal input.
Use this menu item to enable/disable audio output from the AU-
DIO OUT terminal during a search.
OFF	: No output.
ON	: Output
Use this menu item to select the audio channel output from the
AUDIO OUT terminal when playing back tapes recorded in the 32k
mode.
CH1/CH2		: Outputs CH1 and CH2 audio.
MIX		: Outputs mixed audio of CH1 and CH3 and mixed au-
		dio of CH2 and CH4.
CH3/CH4		: Outputs CH3 and CH4 audio.
Memo
This setting can also be selected from the AUDIO OUT SEL. but-
ton on the wireless remote controller.
Use this menu item to select the standard level for audio playback
output.
ATT	: Attenuates the standard level to –12db. Use this setting
	when playing tapes recorded at the standard level of
	–12dB. The playback level is decreased by 8db.
NORM : Sets the standard level to –20dB. Usually, this is selected.
Memo
This setting can also be selected with the AUDIO OUT LEVEL
button on the wireless remote controller.
Use this setting to determine whether to apply the setups to the
analogue video signals (composite, Y/C). (For recording and play-
back).
OFF	: does not apply the setups.
ON	: applies the setups
Memo

•If dubbing is repeatedly done with the settings of the playback or recording video signals differing from the setting here, the hue and brightness of the video may turn out abnormal.

Return to the TOP MENU.

61