6 MEMORY CHANNELS
CHANNEL DISPLAY
While in this mode, the transceiver displays only memory channel numbers (or memory names if stored) instead of frequencies.
1Press [A/B]+[ 
] (POWER).
•The transceiver displays the memory channel number in place of the operating frequencies.
2Turn the Tuning control or press [
]/ [
] to select your desired memory channel number.
While in the Channel Display mode, only the following keys can be operated.
[KEY]
LAMP | MONI | LOW | BAND | A/B | INFO |
|
|
|
|
|
|
SQL | BAL | REV | ENT | F | MR |
|
|
|
|
|
|
CALL1 | PTT |
|
|
|
|
Tuning control
1When the “1750” is selected for the CALL key.
[F]then
LAMP1 | LOW | A/B | ENT | F |
1The light stays ON until the key is pressed again.
[KEY] (1 s)
LAMP
INFO
MHz
F
MR
While transmitting:
LAMP | MNU | 1 | 2 | 3 | 4 |
|
|
|
|
|
|
5 | 6 | 7 | 8 | 9 | 0 |
|
|
|
|
|
|
| # | A | B | C | D |
|
|
|
|
|
|
When the transceiver is turned OFF, [ 
] (POWER) and
A/B
F
To recover normal operation, turn the transceiver OFF and press [A/B]+[ 
] (POWER) again.
Note:
◆To enter the Channel Display mode, you must have at least one memory channel that contains the data.
◆If the memory channel contains the memory name data, the memory name is displayed in place of the “CH” characters.
21